P-99 / LOW PSI OIL BURNER
OPERATOR EXAM
K
C
QUESTIONS WITH CORRECT
LO
SOLUTIONS ALL VERIFIED BY
AN EXPERT A+ GRADED
YC
(LATEST)
D
U
ST
, All heating, combustion, and cooking equipment shall be provided with insulation or the building
construction shall be fire protected, so that during operation the surface of combustible
construction materials will not be raised to a temperature higher than ____. - ANS 170 ̊ F
Acceptance tests: Boilers shall not be placed in operation upon completion of construction until
K
they have been ____ and an equipment use permit has been issued by the commissioner. -
ANS Inspected and tested.
C
Periodic boiler inspections: All boilers shall be inspected at least ____ including chimney
connections. - ANS Once a year.
LO
Owner's annual statement: The owner of each boiler that is subject to periodic inspections shall
file an annual ____ with the commissioner, specifying the location of each boiler and
arrangement for inspection. - ANS Written statement.
What three things must be tested for any fuel burning and storage installation before the system
YC
can be operated? - ANS (1) Tightness of liquid fuel piping.
(2) Tightness of fuel oil storage tanks.
(3) Tightness of gas distribution piping.
D
What are instruction cards for oil burning systems? - ANS Cards giving complete instructions
for care and operation that are permanently located near the equipment.
U
Every oil burning installation that is not fully automatic or requires preheating shall be operated
by, or under, the direct supervision of a person holding a ____ issued by the fire commissioner. -
ANS COF
ST
After any fuel burning equipment repair for which a licensed operator is required, such operator
shall also check the repairs and be ____ while the equipment is started. - ANS Present.
What is abatement of air contaminants? - ANS Compliance with the air pollution control code.
What are the 3 equipment classifications and their temperatures for the products of combustion
at the point of leaving the equipment? - ANS (1) Low Temp: 600° F or less.
(2) Medium Temp: 600° - 1000° F.
OPERATOR EXAM
K
C
QUESTIONS WITH CORRECT
LO
SOLUTIONS ALL VERIFIED BY
AN EXPERT A+ GRADED
YC
(LATEST)
D
U
ST
, All heating, combustion, and cooking equipment shall be provided with insulation or the building
construction shall be fire protected, so that during operation the surface of combustible
construction materials will not be raised to a temperature higher than ____. - ANS 170 ̊ F
Acceptance tests: Boilers shall not be placed in operation upon completion of construction until
K
they have been ____ and an equipment use permit has been issued by the commissioner. -
ANS Inspected and tested.
C
Periodic boiler inspections: All boilers shall be inspected at least ____ including chimney
connections. - ANS Once a year.
LO
Owner's annual statement: The owner of each boiler that is subject to periodic inspections shall
file an annual ____ with the commissioner, specifying the location of each boiler and
arrangement for inspection. - ANS Written statement.
What three things must be tested for any fuel burning and storage installation before the system
YC
can be operated? - ANS (1) Tightness of liquid fuel piping.
(2) Tightness of fuel oil storage tanks.
(3) Tightness of gas distribution piping.
D
What are instruction cards for oil burning systems? - ANS Cards giving complete instructions
for care and operation that are permanently located near the equipment.
U
Every oil burning installation that is not fully automatic or requires preheating shall be operated
by, or under, the direct supervision of a person holding a ____ issued by the fire commissioner. -
ANS COF
ST
After any fuel burning equipment repair for which a licensed operator is required, such operator
shall also check the repairs and be ____ while the equipment is started. - ANS Present.
What is abatement of air contaminants? - ANS Compliance with the air pollution control code.
What are the 3 equipment classifications and their temperatures for the products of combustion
at the point of leaving the equipment? - ANS (1) Low Temp: 600° F or less.
(2) Medium Temp: 600° - 1000° F.
