Firefighter 1 BEFO Final study guide Exam Answers

Firefighter 1 BEFO Final study guide Exam Question and Answers What is the mission for the fire service? - answersto save lives and protect property What NFPA standard establishes basic training criteria for Firefighter 1 and Firefighter 2? - answers1001 Which of the following fire service organizational principals is described as a formal line of authority? - answersChain of Command A(an)___ is a written step by step plan of action. - answersprocedure Which of the following is the best action to take when approached by media while on scene? - answersDirect the media to Public Information Officer Which of the following must a fire department's safety and health program address? - answersAll anticipated hazards to which members may be exposed The goal of the National Fallen Firefighters Foundation is to reduce fatalities by twenty-five percent within five years and by ___ in ten years. - answers50% The concept of risk management is based on an assessment of benefits gained compared to the___ - answersrisks involved Which of the following is the only exception to the rule: never stand on or in a moving apparatus? - answersWhen loading hose and apparatus is moving forward at 5 mph or less Which of the following best describes ways to prevent back and leg strains. - answersLift with straight back and use legs Which of the following is a telecommunications system? - answersPublic Safety Answering Point (PSAP) Which of the following regulates all radio communication in the United States? - answersFederal Communications Commission (FCC) Which of the following radio limitations can mean a receiver is near the limit of its transmission range? - answersStatic and broken messages Units or individuals must ___ in every transmission as outlined in the local radio protocols. - answersIdentify themselves Which of the following is a guideline to ensure a message is heard and understood? - answersuse a moderate rate of speaking Which of the following is the most common building material in North America? - answersWood Steel structural members lengthen as much as 4 inches (100 mm) when heated to: - answers1,000F Laminated timber, medium density fiberboard (MDF), and finger-jointed timber are all examples of what common building material? - answersComposite Material What building component is designed to support the weight of a building and all its contents? - answersFoundation Doors are classified by: - answersthe way they operate. Which of the following best describes how understanding the physical science of fire can help firefighters? - answersit translates into practical knowledge of fire behavior What type of reaction releases energy in the form of heat and sometimes light? - answersExothermic Which oof the following best describes what the fire tetrahedron represents? - answersAn uninhibited chemical chain reaction What product of combustion causes the most fire deaths? - answersToxic Smoke What type of rapid fire development happens when all the combustible materials and gases in a compartment ignite almost simultaneously? - answersFlashover What type of portable fire extinguisher is discharged in the form of gas and works on Class B and Class C fires? - answerscarbon dioxide (CO2) The P in the PASS acronym stands for: - answerspull pin by breaking wire or seal. Which of the following types of rope is only used in situations not involving life safety? - answersUtility rope In a kernmantle rope, the ____ protects the core from abrasion. - answerssheath Which of the following types of rope os the only rope required to have a rope log? - answersLife safety rope Which type of knot is used for joining two ropes of unequal diameter? - answersbecket bend What is one way that fire service ladders are different from ladders for private industry or general use? - answersFire Service ladders provide a greater margin of safety Which type of ladder has hinged rungs that allow the ladder to be folded so that one beam rests against the other, allowing it to be carried in narrow passageways? - answersFolding ladder Factors to consider when deciding where to place a ladder include: - answersthe structural features of the building Which type of fire hydrants are designed for use in climates that have freezing temperatures? - answersDry-barrel hydrants All hydrants must be opened and closed ___ to prevent damage. - answersslowly How can a mechanic damage be prevented? - answersProvide traffic control to prevent vehicles from driving over hose Which hose tool can be installed when a hoseline ruptures but must remain charged to continue the fire attack? - answersHose jacket Characteristics of water that make it valuable for fire extinguishment include: - answersa greater heat absorbing capacity than other agents Friction loss may be overcome by: - answersincreasing pump pressure Which fire behavior indicator provides visual indicators such as the size and location of the fire? - answersFlame Which of the following must be done before raising a ladder? - answersCheck for overhead wires or electrical equipment Once the fire extinguisher is selected, you must perform a visual inspection to ensure the extinguisher: - answersis charged and operable Which type of damage must be recorded in the rope log because it cannot be detected by inspections? - answersimpact loading incidents firefighters should avoid _____ in order to prevent grinding dirt and debris into ropes. - answerswalking on rope