PCNSE (questions well answered)
graded A+
2 ways to Reset to Factory default - correct answer ✔✔* from CLI with known password
. request system private-data-reset
* from CLI without PW
reboot and type "maint" during bootup
choose Reset to factory default
or load another config into running memory
DNS and NTP are configured where? - correct answer ✔✔Device > Setup > Services
where do you configure service routes - correct answer ✔✔device > setup > services > service route
configuration
name of the running config - correct answer ✔✔running-config.xml
where do you manage configurations - correct answer ✔✔device > setup > operations
Steps needed prior to firewall being usable - correct answer ✔✔* register with PA
* activate licenses
* verify update and DNS
* manage content updates
* install software updates
where is Pan-OS software updates - correct answer ✔✔device > software
, where do you define an interface management profile - correct answer ✔✔network > network profiles >
interface mgmt > add
What are the four major components that enable threat prevetion - correct answer ✔✔* Natively
integrated technologies that leverage single pass prevention architecture, support open communication
* Automated creation and delivery of protection mechanisms
*Extensibility and flexibility
* Threat inelligence sharing
Throughput in a PA 7080 - correct answer ✔✔App-ID firewall throughput 200Gps
Threat prevention throughput 100 Gbps
Throughput of a PA7050 - correct answer ✔✔App-id throughput 120 Gbps
Threat prevention 60 Gbps
throughput of a PA 5280/5260 - correct answer ✔✔App-id thoughput 68 Gbps
threat prevention throughput 30 gbps
throughput of a PA5250 - correct answer ✔✔app-id throughput 39 gbps
threat prevention 20 gbps
throughput of a PA5220 - correct answer ✔✔App-id 18gbps
threat prevention 9 gbps
Describe HA active/passive deployment - correct answer ✔✔recommended, single firewall config
synched between the two firewalls.
Synchronization happens across HA1 connection
graded A+
2 ways to Reset to Factory default - correct answer ✔✔* from CLI with known password
. request system private-data-reset
* from CLI without PW
reboot and type "maint" during bootup
choose Reset to factory default
or load another config into running memory
DNS and NTP are configured where? - correct answer ✔✔Device > Setup > Services
where do you configure service routes - correct answer ✔✔device > setup > services > service route
configuration
name of the running config - correct answer ✔✔running-config.xml
where do you manage configurations - correct answer ✔✔device > setup > operations
Steps needed prior to firewall being usable - correct answer ✔✔* register with PA
* activate licenses
* verify update and DNS
* manage content updates
* install software updates
where is Pan-OS software updates - correct answer ✔✔device > software
, where do you define an interface management profile - correct answer ✔✔network > network profiles >
interface mgmt > add
What are the four major components that enable threat prevetion - correct answer ✔✔* Natively
integrated technologies that leverage single pass prevention architecture, support open communication
* Automated creation and delivery of protection mechanisms
*Extensibility and flexibility
* Threat inelligence sharing
Throughput in a PA 7080 - correct answer ✔✔App-ID firewall throughput 200Gps
Threat prevention throughput 100 Gbps
Throughput of a PA7050 - correct answer ✔✔App-id throughput 120 Gbps
Threat prevention 60 Gbps
throughput of a PA 5280/5260 - correct answer ✔✔App-id thoughput 68 Gbps
threat prevention throughput 30 gbps
throughput of a PA5250 - correct answer ✔✔app-id throughput 39 gbps
threat prevention 20 gbps
throughput of a PA5220 - correct answer ✔✔App-id 18gbps
threat prevention 9 gbps
Describe HA active/passive deployment - correct answer ✔✔recommended, single firewall config
synched between the two firewalls.
Synchronization happens across HA1 connection
