1. Which Aruba switches enable virtual switching fabric? - ANSWER: Aruba
5400R ZL2 Series
2. Which Aruba solution enables policy-based access management? - ANSWER
Aruba ClearPass
1. How do you think LLDP may be used in a laboratory setting? - ANSWER
You may utilize LLDP information to see how devices are connected in the lab
topology, which is very useful when you don't have physical access to the
switches. You can check connectivity, port connections, and other basic
configuration parameters (such IP address).
2. What are some other applications for LLDP? - ANSWER LLDP can be used
to troubleshoot, locate network devices, and acquire information about them.
LLDP can be used by SNMP programs and other applications to discover
network devices and establish an environment's Layer 2 topology.
1. What tasks can you complete on an ArubaOS switch in the basic context? At
the enabled context? - ANSWER At the most basic level, you can check
statistics and customize data. At the enable context, you may start configuring
the switch. You can also access the global configuration context, which allows
you to configure more settings and access other contexts.
2. What character do you type to access context-sensitive help? - ANSWER
You type the question mark (?).
3. Which of the following information cannot be found in a switch's LLDP table
for adjacent devices?
, a. Major device functions b. Current users registered in c. Management IP
address d. Device identification e. Local port identifier - ANSWER: b.
1. What sort of management access allows remote access to an IP address while
separating management traffic from data traffic?
There are three options: in-band Telnet, in-band SSH, and out-of-band Telnet
on an Ethernet OOBM port.
d. Out-of-band using a serial console port. - ANSWER c. Out-of-band Telnet
using an Ethernet OOBM port
2. How does an ArubaOS switch handle Telnet using the factory default
settings?
a. It prevents Telnet access.
b. It provides Telnet access and requires password authentication. However,
without a password, access is restricted.
c. It allows Telnet access and requires password authentication using a preset
password.
d. It allows Telnet access without a password. - ANSWER d. It allows Telnet
access without a password.
1. How many operating systems may be installed in flash on an ArubaOS
switch?
The correct answer is b. Two.
2. What command sets the primary flash destination as the default boot file? -
ANSWER: Boot Set-Default Flash Primary
3. Which command removes the startup configuration file and reboots the
switch to factory default settings? - ANSWER: wipe startup-config.
1. What is the highest number of usable VLANs that 802.1Q allows?
a. 512 b. 1,023 c. 1,024 d. 2,047 e. 2,048 f. 4,094 g. 4,096 ANSWER: 4094.
The VLAN ID can take up to 4096 values, two of which are reserved (0 and
4095).
5400R ZL2 Series
2. Which Aruba solution enables policy-based access management? - ANSWER
Aruba ClearPass
1. How do you think LLDP may be used in a laboratory setting? - ANSWER
You may utilize LLDP information to see how devices are connected in the lab
topology, which is very useful when you don't have physical access to the
switches. You can check connectivity, port connections, and other basic
configuration parameters (such IP address).
2. What are some other applications for LLDP? - ANSWER LLDP can be used
to troubleshoot, locate network devices, and acquire information about them.
LLDP can be used by SNMP programs and other applications to discover
network devices and establish an environment's Layer 2 topology.
1. What tasks can you complete on an ArubaOS switch in the basic context? At
the enabled context? - ANSWER At the most basic level, you can check
statistics and customize data. At the enable context, you may start configuring
the switch. You can also access the global configuration context, which allows
you to configure more settings and access other contexts.
2. What character do you type to access context-sensitive help? - ANSWER
You type the question mark (?).
3. Which of the following information cannot be found in a switch's LLDP table
for adjacent devices?
, a. Major device functions b. Current users registered in c. Management IP
address d. Device identification e. Local port identifier - ANSWER: b.
1. What sort of management access allows remote access to an IP address while
separating management traffic from data traffic?
There are three options: in-band Telnet, in-band SSH, and out-of-band Telnet
on an Ethernet OOBM port.
d. Out-of-band using a serial console port. - ANSWER c. Out-of-band Telnet
using an Ethernet OOBM port
2. How does an ArubaOS switch handle Telnet using the factory default
settings?
a. It prevents Telnet access.
b. It provides Telnet access and requires password authentication. However,
without a password, access is restricted.
c. It allows Telnet access and requires password authentication using a preset
password.
d. It allows Telnet access without a password. - ANSWER d. It allows Telnet
access without a password.
1. How many operating systems may be installed in flash on an ArubaOS
switch?
The correct answer is b. Two.
2. What command sets the primary flash destination as the default boot file? -
ANSWER: Boot Set-Default Flash Primary
3. Which command removes the startup configuration file and reboots the
switch to factory default settings? - ANSWER: wipe startup-config.
1. What is the highest number of usable VLANs that 802.1Q allows?
a. 512 b. 1,023 c. 1,024 d. 2,047 e. 2,048 f. 4,094 g. 4,096 ANSWER: 4094.
The VLAN ID can take up to 4096 values, two of which are reserved (0 and
4095).
