IRON WORKER QUESTIONS AND ANSWERS
______________________ are used to mark metal. - Answers- scribes
_______ is the substance that helps join heated metal pipe. - Answers- Flux
A right-angle portable electric drill is useful when drilling between
__________________. - Answers- joists
Pipe that does not contain iron is called ______________ pipe. - Answers- nonferrous
___________________ is uncut tubing material on hand for use on a project. -
Answers- Tube stock
A surface that is straight vertically is considered ________________ . - Answers-
plumb
Soapstone or ___________ are used to mark a cutting line on the surface of a tube. -
Answers- keel crayon
A(n) __________________ can be found in the handle of some combination squares
for leveling. - Answers- spirit level
A(n) __________________ is a combination of elbows or bends that brings one section
of the pipe out of line but into a line parallel with other section. - Answers- offset
The process of removing burrs in a pipe is pipe ______________________. - Answers-
reaming
Bar material that is uncut on a work site is ____________________. - Answers- bar
stock
A surface that is straight horizontally is considered __________________. - Answers-
level
Heads of striking tools that have _____________, or are mushroomed, must be
replaced or restored. - Answers- burrs
________________is the twisting or turning force applied in a rotating motion. -
Answers- Torque
__________________ is the filler material used to connect joints during soldering. -
Answers- Solder
Speed squares combine a(n)______________ protractor, and framing square in one
tool. - Answers- miter
______________________ are used to mark metal. - Answers- scribes
_______ is the substance that helps join heated metal pipe. - Answers- Flux
A right-angle portable electric drill is useful when drilling between
__________________. - Answers- joists
Pipe that does not contain iron is called ______________ pipe. - Answers- nonferrous
___________________ is uncut tubing material on hand for use on a project. -
Answers- Tube stock
A surface that is straight vertically is considered ________________ . - Answers-
plumb
Soapstone or ___________ are used to mark a cutting line on the surface of a tube. -
Answers- keel crayon
A(n) __________________ can be found in the handle of some combination squares
for leveling. - Answers- spirit level
A(n) __________________ is a combination of elbows or bends that brings one section
of the pipe out of line but into a line parallel with other section. - Answers- offset
The process of removing burrs in a pipe is pipe ______________________. - Answers-
reaming
Bar material that is uncut on a work site is ____________________. - Answers- bar
stock
A surface that is straight horizontally is considered __________________. - Answers-
level
Heads of striking tools that have _____________, or are mushroomed, must be
replaced or restored. - Answers- burrs
________________is the twisting or turning force applied in a rotating motion. -
Answers- Torque
__________________ is the filler material used to connect joints during soldering. -
Answers- Solder
Speed squares combine a(n)______________ protractor, and framing square in one
tool. - Answers- miter
