Construction Materials, Methods, And Techniques Final Chapter 17

CONSTRUCTION MATERIALS, METHODS, AND TECHNIQUES FINAL CHAPTER 17 _____ STRESS IS PRODUCED WHEN VERTICAL LOADS ARE APPLIED TO A MEMBER, CREATING A DEFORMATION IN PLANES SLIDE RELATIVE TO EACH OTHER SO AS TO REMAIN PARALLEL. ️️Shear FLAT, CONCRETE _____, STIFFENED IN BOTH DIRECTIONS, ARE USED TO STABILIZE A STRUCTURAL FRAME. ️️Shear Walls WHICH OF THE FOLLOWING IS A THREE-DIMENSIONAL STRUCTURAL FRAME SPANNING IN SEVERAL DIRECTIONS OVER A LARGE AREA? ️️SPACEFRAME _____ USE SHIPPING AND ASSEMBLY MARKS TO DIRECT THE PLACEMENT OF STRUCTURAL MEMBERS IN THEIR DESIRED LOCATIONS. ️️ERECTION DRAWINGS BOLTS USED IN A FRICTION CONNECTION MUST BE TIGHTENED TO A MINIMUM OF _____ OF THEIR ULTIMATE TENSILE STRENGTH. ️️70% WHICH OF THE FOLLOWING IS TRUE ABOUT THE PURPOSE OF FIREPROOFING A STEEL STRUCTURE? ️️B AND C ONLY _____ CONNECTIONS JOIN A BEAM TO AN ADJOINING MEMBER WITH CONNECTORS, SUCH AS ANGLES, THAT ARE SECURED TO THE BEAM WEB. ️️FRAMED _____ DRAWINGS CONTAIN THE NECESSARY INFORMATION FOR THE FABRICATION OF EACH MEMBER. ️️SHOP A _____ IS A COPLANAR (FORCES OPERATING IN THE SAME PLANE) ASSEMBLY OF STRUCTURAL MEMBERS ENDS. ️️TRUSS WHICH OF THE FOLLOWING ARE WAYS IN WHICH TO IMPROVE THE BONDING OF CONCRETE TO A METAL DECK? (SELECT ALL THAT APPLY) ️️A. PERFORATIONS B. SHEAR STUDS C. TACK-WELDED WIRE FABRIC ____ TROWELED OVER A METAL LATH IS A LIGHTWEIGHT FIRE PROTECTION MATERIAL. ️️LIGHTWEIGHT PLASTER ALL BOLTED AND RIVETED CONNECTIONS ARE BEARING TYPE CONNECTIONS ️️F PRE-ENGINEERED_____ USE STEEL COLUMNS AND OPEN WEB JOISTS AND GIRDERS TO FORM A ROOF. ️️TRUSS-TYPE BUILDINGS WHICH OF THE FOLLOWING MUST BE CONSIDERED BY THE STRUCTURAL ENGINEER DESIGNING THE STRUCTURAL STEEL FRAME FOR A BUILDING? (SELECT ALL THAT APPLY ️️A. THE SIZE, TYPE AND STRENGTH OF THE CONNECTORS B. THE STRENGTH OF THE BASE MATERIALS D. END REACTIONS OF BEAMS _____ ARE FORMED FROM FLAT COLD-ROLLED PIECES OF CARBON STEEL. ️️C. LIGHT-GUAGE STRUCTURAL STEEL _____ USE DIAGONAL MEMBERS TO PROVIDE TRIANGULATION THAT BRACES THE FRAMING FROM DEFORMATIONS. ️️BRACED FRAMES