NICET LEVEL 1 HIGHWAY
CONSTRUCTION Questions and
Answers (Best Rated)
Acceptance
✓ The written acceptance by the Department of the Work.
acceptance testing
✓ Testing conducted by the Department to measure the degree of
compliance to the Contract
actual cost
✓ The computed cost using calculations provided
addendum
✓ A Contract revision or response to a Contractor inquiry issued after
advertisement and before the opening of bids.
as-built quantity
✓ The quantity of a completed Item eligible for payment
Master01 | September, 2024/2025 | Latest update
, 1 | P a g e | © copyright 2024/2025 | Grade A+
authorized funding amount
✓ The amount of funds authorized by the Department for the Contract
Bidder
✓ The individual, firm, partnership, corporation, joint venture, or any
acceptable combination thereof that submits a bid to the
Department.
bridge
✓ . A structure, other than a culvert, including supports, erected over a
depression or an obstruction, such as water, highway, or railway, and
having a track or passageway for carrying traffic or other moving loads
and having a length 3 measured along the center of the structure of
more than 20 feet between undercopings of abutments or extreme
ends of openings for multiple boxes. Structure dimensions are defined
as follows:
bridge length
Master01 | September, 2024/2025 | Latest update
, 1 | P a g e | © copyright 2024/2025 | Grade A+
✓ The overall length measured along the line of survey stationing from
back to back of backwalls of abutments, if present, otherwise end to
end of the bridge floor; but, in no case less than the total clear opening
of the structure
bridge width
✓ The clear width measured at right angles to the longitudinal centerline
of the bridge between the bottom of curbs, or in the case of multiple
height of curbs, between the bottoms of the lower risers or, if curbs are
not used, between inner faces of parapet or railing
Change Order.
✓ A written order issued by the Department to the Contractor after
execution of the Contract authorizing one or more of the following: 1.
Changes in the Work. 2. Modifications in the basis of payment. 3.
Modifications to Contract Time.
Commercially Useful Function
Master01 | September, 2024/2025 | Latest update