• Wrong document? Swap it for free
  • Written by students who passed
  • Immediately available after payment
  • Read online or as PDF
Sell
Where do you study
Your language
Document preview thumbnail
Preview 2 out of 7 pages
Exam (elaborations)

FPC Processing Questions and Answers

Document preview thumbnail
Preview 2 out of 7 pages

FPC Processing Questions and Answers (006) Correct any evidence of wear or deterioration in a clean room at the first opportunity in order to prevent. A) generation or accumulation of contaminants. (007) Inspect all printing equipment B) immediately before you use it. Previous Play Next Rewind 10 seconds Move forward 10 seconds Unmute 0:07 / 0:15 Full screen Brainpower Read More (007) Flush mixing tanks and recirculation systems A) before and after mixing each batch of solution. (008) Process exposed film as soon as possible because C) chemical deterioration of the latent image can occur. (008) What occurs if you remove film from its container while its temperature is below the dewpoint of the surrounding air? C) Condensation. (009) Any solution above or below the required concentration will behave as a A) contaminated solution. (010) Which personal habit must you avoid in the clean room environment? D) Scratching and rubbing exposed areas of your body. (011) Clean room de-dusting procedures are mandatory upon A) entering the clean room. (012) Which reference is an advantage of the metric system? C) Most industrialized countries use the metric system. (012) In the metric system, what are three basic units of measurement? A) Liter, gram, and meter. (013) Convert 375 meters to centimeters. C) 37,500. (013) Converting measurements from one unit to another (meters to centimeters or milligrams to grams) is a function of D) multiplication or division. (014) The order of the rule of precedence in solving mathematical problems is C) multiply, divide, add, and subtract. (014) Applying the rules of precedence, solve the equation 6 + 8 x 4 - 6 ÷ 3. C) 36 (014) Round 67.455 to the nearest tenth. B) 67.5 (015) If a photographic process requires starter to be added to the developer at a rate of 3 ounces of starter to 1 gallon of developer, how much starter must you add to 12 gallons of developer? C) 36 ounces. (015) Solve the equation 4.2 x 10-2 C) 0.042. (015) The square root of 64 equals B) 8 (016) Find the common logarithm of 1,000. A) 3 (016) What is the characteristic of 245? B) 2 (016) The log of 5.95 has a mantissa of .7745. What is the log of 595? C) 2.7745. (017) What is the advantage of using logarithms to solve mathematical equations? B) When you must multiply large numbers. (017) With multiplication equations, generally speaking, how many place tables will give you sufficient accuracy? A) Four. (018) How do you use a calculator to find the antilog 2 .395? D) Enter the mantissa (.395) into the calculator; press the keys labeled "INV" and "LOG". Locate the decimal point two places to the left. (019) Find the mean of 23, 8, 16, 20, 23. B) 18. (019) The number that divides the bottom 50 percent from the top 50 percent of a set of numbers is called the C) median. (020) To find the range of a set of numbers, B) subtract the smallest value in the set from the largest value. (020) If the mean WAPS test score for Staff Sergeants is 74 with a standard deviation of 2.6, statistically, what percentage of those testing scored between 68.8 and 79.2? (031) Why is it important to mix chemicals in their proper order and to ensure that each is thoroughly dissolved before adding the next? C) Not doing so can cause an adverse reaction. (032) How do you minimize the chance of contamination when mixing chemical dust in water? A) Mix them in nonporous containers that are inert to the solutions. (033) Because specific gravity varies from one batch of solutions to another, you must measure each batch B) by setting upper and lower control limits. (033) Since each hydrometer is calibrated to measure only a certain range of specific gravities, you should always begin measuring with the D) lightest hydrometer. (034) Why must you never use metal electrodes to determine the pH of developers? B) Electrical potential must be developed using a glass electrode (035) What chemicals are used to ripen (age) a freshly-mixed developer? C) Bromide and iodide. (036) The design of the certification roll varies, depending upon the type of processor being used and A) the previous stability history of the processor. (037) Where will you find most of the information you will include in processor startup procedures? D) In the respective processor's operating and maintenance manuals. (038) To insure that the Quality Assurance Test is not affected by short-term defects, you must run at least how many feet of simulated product? A) 50 feet. (039) The Processing Uniformity Test can detect density variations caused by D) failure to arrest the development. (039) The Processing Uniformity Test consists of an evaluation of the density variations across the width of a. from one to three samples. (040) After a film processor is certified, and you begin processing the mission film, why should you also begin the process control phase? B) To insure the processor remains in standard. (041) In densitometry certification, if the difference between the measured and calibrated densities is less than the certification tolerance, consider the densitometer A) to be in control. (041) To determine a densitometer's previous history, conduct a statistical evaluation of the densitometer's performance during B) 3 or 4 weeks of normal operation. (042) If the developer's temperature fluctuates, and the incoming water supply and recirculation are correct, what part of the film processor is probably at fault? D) The thermostat. (043) How often do you check the calibration of the film processor speed indicator? A) Daily.

Content preview

FPC Processing Questions and Answers
(006) Correct any evidence of wear or deterioration in a clean room at the first
opportunity in
order to prevent. - answer A) generation or accumulation of contaminants.

(007) Inspect all printing equipment - answer B) immediately before you use it.

(007) Flush mixing tanks and recirculation systems - answer A) before and after
mixing each batch of solution.

(008) Process exposed film as soon as possible because - answer C) chemical
deterioration of the latent image can occur.

(008) What occurs if you remove film from its container while its temperature is below
the dewpoint of the surrounding air? - answer C) Condensation.

(009) Any solution above or below the required concentration will behave as a - answer
A) contaminated solution.

(010) Which personal habit must you avoid in the clean room environment? - answer
D) Scratching and rubbing exposed areas of your body.

(011) Clean room de-dusting procedures are mandatory upon - answer A) entering
the clean room.

(012) Which reference is an advantage of the metric system? - answer C) Most
industrialized countries use the metric system.

(012) In the metric system, what are three basic units of measurement? - answer A)
Liter, gram, and meter.

(013) Convert 375 meters to centimeters. - answer C) 37,500.

(013) Converting measurements from one unit to another (meters to centimeters or
milligrams to grams) is a function of - answer D) multiplication or division.

(014) The order of the rule of precedence in solving mathematical problems is - answer
C) multiply, divide, add, and subtract.

(014) Applying the rules of precedence, solve the equation 6 + 8 x 4 - 6 ÷ 3. - answer
C) 36

(014) Round 67.455 to the nearest tenth. - answer B) 67.5

, (015) If a photographic process requires starter to be added to the developer at a rate of
3 ounces of starter to 1 gallon of developer, how much starter must you add to 12
gallons of developer? - answer C) 36 ounces.

(015) Solve the equation 4.2 x 10-2 - answer C) 0.042.

(015) The square root of 64 equals - answer B) 8

(016) Find the common logarithm of 1,000. - answer A) 3

(016) What is the characteristic of 245? - answer B) 2

(016) The log of 5.95 has a mantissa of .7745. What is the log of 595? - answer C)
2.7745.

(017) What is the advantage of using logarithms to solve mathematical equations? -
answer B) When you must multiply large numbers.

(017) With multiplication equations, generally speaking, how many place tables will give
you sufficient accuracy? - answer A) Four.

(018) How do you use a calculator to find the antilog 2 .395? - answer D) Enter the
mantissa (.395) into the calculator; press the keys labeled "INV" and "LOG". Locate the
decimal point two places to the left.

(019) Find the mean of 23, 8, 16, 20, 23. - answer B) 18.

(019) The number that divides the bottom 50 percent from the top 50 percent of a set of
numbers is called the - answer C) median.

(020) To find the range of a set of numbers, - answer B) subtract the smallest value
in the set from the largest value.

(020) If the mean WAPS test score for Staff Sergeants is 74 with a standard deviation of
2.6,
statistically, what percentage of those testing scored between 68.8 and 79.2? - answer

(031) Why is it important to mix chemicals in their proper order and to ensure that each
is thoroughly dissolved before adding the next? - answer C) Not doing so can cause
an adverse reaction.

(032) How do you minimize the chance of contamination when mixing chemical dust in
water? - answer A) Mix them in nonporous containers that are inert to the solutions.

Document information

Uploaded on
October 17, 2024
Number of pages
7
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers
$8.49

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
Pogba119
4.0
(15)
Sold
67
Followers
2
Items
5682
Last sold
2 weeks ago




Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions