2023/2024 OSHA-10 Final Exam 50+
QUESTION AND ANSWERS with Verified
Questions & Correct
Answers(Graded A+)
, 4. During an OSHA inspection: - ANS✔✔--You have the right to talk to the inspector
privately
5. The OSHA standards for Construction and General Industry are found in: -
ANS✔✔--Parts 1926 and 1910
6. When the employer receives an OSHA citation, it must be: - ANS✔✔--Posted for 3
days or until the violation is fixed
7. What does OSHA require employers to post for 3 days? - ANS✔✔--OSHA citations
and abatement verification notices
8. What section of the OSH Act does the Whistleblower Program reference? -
ANS✔✔--Section 11(c)
9. OSHA requires fall protection at different heights for construction and general
industry however, regardless of the fall distance, which of the following is most -
ANS✔✔--A. Fall protection must be provided when working over dangerous
equipment
B. Fall protection must be provided when working over dangerous machinery
C. Both A and B are correct
D. None of the above
10. Employees must not work on scaffold surfaces until: - ANS✔✔--It is determined to
have strength and structural integrity to support intended loads
11. From your choices below, what would you consider to be a "major" fall hazard in
construction? - ANS✔✔-- Roof edges and floor openings A.
B. Steel erection
C. Improper scaffold construction
D. Unsafe use of portable ladders
E. All the above
12. Climbing on the cross braces of scaffolds is allowed: - ANS✔✔--Never
QUESTION AND ANSWERS with Verified
Questions & Correct
Answers(Graded A+)
, 4. During an OSHA inspection: - ANS✔✔--You have the right to talk to the inspector
privately
5. The OSHA standards for Construction and General Industry are found in: -
ANS✔✔--Parts 1926 and 1910
6. When the employer receives an OSHA citation, it must be: - ANS✔✔--Posted for 3
days or until the violation is fixed
7. What does OSHA require employers to post for 3 days? - ANS✔✔--OSHA citations
and abatement verification notices
8. What section of the OSH Act does the Whistleblower Program reference? -
ANS✔✔--Section 11(c)
9. OSHA requires fall protection at different heights for construction and general
industry however, regardless of the fall distance, which of the following is most -
ANS✔✔--A. Fall protection must be provided when working over dangerous
equipment
B. Fall protection must be provided when working over dangerous machinery
C. Both A and B are correct
D. None of the above
10. Employees must not work on scaffold surfaces until: - ANS✔✔--It is determined to
have strength and structural integrity to support intended loads
11. From your choices below, what would you consider to be a "major" fall hazard in
construction? - ANS✔✔-- Roof edges and floor openings A.
B. Steel erection
C. Improper scaffold construction
D. Unsafe use of portable ladders
E. All the above
12. Climbing on the cross braces of scaffolds is allowed: - ANS✔✔--Never
