TEXAS SAFETY INSPECTION FINAL EXAM | ALL
QUESTIONS AND CORRECT ANSWERS |
ALREADY GRADED A+ | VERIFIED ANSWERS |
JUST RELEASED
When is a vehicle required to be inspected for seat belts? ---------
CORRECT ANSWER-----------------Anchorages were part of the
manufacturer's original equipment
The turn signal selector switch must lock in the proper turn position when
applied on: ---------CORRECT ANSWER-----------------all vehicles
A truck or trailer is required to have clearance lamps and side marker
lamps if the total width of the vehicle is: ---------CORRECT ANSWER---------
--------80 inches or more
In order to pass inspection, tires must have a tread depth of at least
_______ in the two center adjacent major grooves ---------CORRECT
ANSWER-----------------2/32 inches
A parking brake is required to be inspected on all cars and trucks beginning
with the model year ______ ---------CORRECT ANSWER-----------------1960
The exhaust system includes the following: ---------CORRECT ANSWER----
-------------Manifold, exhaust pipe, and muffler
,A muffler with a hole which has been patched will ... ---------CORRECT
ANSWER-----------------be rejected
Fluid level in the brake master cylinder must not be more than how many
inches below the top of the reservoir? ---------CORRECT ANSWER-----------
------1 inch
When using a window tint meter, the amount of light transmission cannot
be less than? ---------CORRECT ANSWER-----------------25%
When required, safety guards or flaps must be what width? ---------
CORRECT ANSWER-----------------At least as wide as the tires they are
protecting
Sun screening or glass-coating material will be an item of inspection on the
following vehicles: ---------CORRECT ANSWER-----------------All models
regardless of year
A motor vehicle originally equipped with a catalytic converter will be
rejected if the converter has been removed or disconnected beginning with
the year model ______ ---------CORRECT ANSWER-----------------1984
When checking operation of the headlamps, a vehicle will be rejected if: ----
-----CORRECT ANSWER-----------------Physical damage would obviously
cause a headlamp beam to fail to sufficiently illuminate the roadway ahead
of the vehicle
, A license plate lamp must be white in color and rejected for: ---------
CORRECT ANSWER-----------------Mounting, shoddy wiring, and lamp lens
is broken or does not fit properly
Mirrors should be rejected if: ---------CORRECT ANSWER-----------------
reflecting surface is cracked, peeled or tarnished, mirror interferes with
driver's vision, and if mirror does not afford a clear view to the rear
What color are tail lamps required to be to pass inspection? ---------
CORRECT ANSWER-----------------Red
The wiper blade should be rejected if the portion of the rubber element that
contacts the windshield is torn on one end or both ends combined, more
than.... ---------CORRECT ANSWER-----------------1 inch
True/False: A tailpipe failing to discharge exhaust from the rear, sides or
top of the passenger compartment of the vehicle would pass inspection -----
----CORRECT ANSWER-----------------False
True/False: A center high mount stop lamp must provide a steady-burning
red light when brakes are applied ---------CORRECT ANSWER-----------------
True
True/False: When visually inspecting a CNG system, a letter of
documentation is not acceptable if the label can not be found ---------
CORRECT ANSWER-----------------False
QUESTIONS AND CORRECT ANSWERS |
ALREADY GRADED A+ | VERIFIED ANSWERS |
JUST RELEASED
When is a vehicle required to be inspected for seat belts? ---------
CORRECT ANSWER-----------------Anchorages were part of the
manufacturer's original equipment
The turn signal selector switch must lock in the proper turn position when
applied on: ---------CORRECT ANSWER-----------------all vehicles
A truck or trailer is required to have clearance lamps and side marker
lamps if the total width of the vehicle is: ---------CORRECT ANSWER---------
--------80 inches or more
In order to pass inspection, tires must have a tread depth of at least
_______ in the two center adjacent major grooves ---------CORRECT
ANSWER-----------------2/32 inches
A parking brake is required to be inspected on all cars and trucks beginning
with the model year ______ ---------CORRECT ANSWER-----------------1960
The exhaust system includes the following: ---------CORRECT ANSWER----
-------------Manifold, exhaust pipe, and muffler
,A muffler with a hole which has been patched will ... ---------CORRECT
ANSWER-----------------be rejected
Fluid level in the brake master cylinder must not be more than how many
inches below the top of the reservoir? ---------CORRECT ANSWER-----------
------1 inch
When using a window tint meter, the amount of light transmission cannot
be less than? ---------CORRECT ANSWER-----------------25%
When required, safety guards or flaps must be what width? ---------
CORRECT ANSWER-----------------At least as wide as the tires they are
protecting
Sun screening or glass-coating material will be an item of inspection on the
following vehicles: ---------CORRECT ANSWER-----------------All models
regardless of year
A motor vehicle originally equipped with a catalytic converter will be
rejected if the converter has been removed or disconnected beginning with
the year model ______ ---------CORRECT ANSWER-----------------1984
When checking operation of the headlamps, a vehicle will be rejected if: ----
-----CORRECT ANSWER-----------------Physical damage would obviously
cause a headlamp beam to fail to sufficiently illuminate the roadway ahead
of the vehicle
, A license plate lamp must be white in color and rejected for: ---------
CORRECT ANSWER-----------------Mounting, shoddy wiring, and lamp lens
is broken or does not fit properly
Mirrors should be rejected if: ---------CORRECT ANSWER-----------------
reflecting surface is cracked, peeled or tarnished, mirror interferes with
driver's vision, and if mirror does not afford a clear view to the rear
What color are tail lamps required to be to pass inspection? ---------
CORRECT ANSWER-----------------Red
The wiper blade should be rejected if the portion of the rubber element that
contacts the windshield is torn on one end or both ends combined, more
than.... ---------CORRECT ANSWER-----------------1 inch
True/False: A tailpipe failing to discharge exhaust from the rear, sides or
top of the passenger compartment of the vehicle would pass inspection -----
----CORRECT ANSWER-----------------False
True/False: A center high mount stop lamp must provide a steady-burning
red light when brakes are applied ---------CORRECT ANSWER-----------------
True
True/False: When visually inspecting a CNG system, a letter of
documentation is not acceptable if the label can not be found ---------
CORRECT ANSWER-----------------False
