Motorcycle Safety Foundation || with 100% Error-free
Answers.
An off-highway motorcycle: correct answers Primarily is used for off-highway recreation and
competition.
Before risks can be managed, a rider must: correct answers Consider the consequences of
actions.
To have a margin of safety means to: correct answers Create time and space.
The primary function of helmet is to: correct answers Protect the head and brain.
Which of the following stickers indicates a helmet manufactured to meed federal requirements?
correct answers DOT and Snell
Good advice for cold weather riding is to: correct answers Dress in layers.
A good way to remember the pre-ride inspection checklist is to think: correct answers T-CLOCS
The throttle is: correct answers The right handgrip.
The clutch lever is used to: correct answers Connect power from the engine to the rear wheel.
The shift pattern on a motorcycle is: correct answers Set up to shift to higher gears by lifting the
gearshift lever.
A way to remember the engine start procedure is: correct answers FINE-C
The friction zone is used to: correct answers Control starting out from a stop.
Most of a motorcycle's stopping power is related to its: correct answers Front brake.
A motorcyclist generally divides a road lane into: correct answers Thirds.
The recommended distance to look ahead to identify hazards is: correct answers 12 seconds.
A proper technique for going over an obstacle is: correct answers Rise off the seat.
Overriding the headlights occurs when: correct answers Riding too fast for conditions at night.
Linked brakes are brakes that: correct answers Cause both brakes to be applied if either is used.
When it is necessary to respond to a close call, a rider should: correct answers Separate braking
and swerving.
, The surface of a road is most slippery when it first begins to rain because: correct answers Water
mixes with dirt and oil.
A correct procedure for a passenger to follow is to: correct answers Look over your shoulder in
the direction of turns.
A good response to a dog that chases after you is to: correct answers Upset its timing.
The two primary effectsof alcohol on riding are: correct answers Vision and judgement.
What is considered one drink: correct answers 12 ounces of beer = 5 ounces of wine = 1.5
ounces of hard liquor (one shot).
The best way to intervene when someone has had too much to drink is to: correct answers Enlist
the help of others.
Primary differences between cars and motorcycles are: correct answers Stability and
vulnerability.
Who is primarily responsible for a motorcyclist's safety? correct answers The rider.
The primary cause of motorcycle crashes is: correct answers An interaction of factors.
The primary purposes of personal protective gear are: correct answers Comfort and protection.
The retention system on a helmet is designed to: correct answers Keep the helmet in place.
Hypothermia refers to: correct answers Subnormal body temperature.
The best source of information about routine motorcycle maintenance is: correct answers The
motorcycle owner's manual.
The primary motorcycle control is: correct answers The handlebar.
To initiate lean on a motorcycle, a rider: correct answers Presses the handgrip in the direction of
the turn.
A rider changes gears by: correct answers Lifting or pressing on the shift lever.
The brakes are operated by: correct answers The right hand and the right foot.
The fuel supply valve: correct answers Controls the flow of gasoline to the engine.
The engine cut-off switch is located: correct answers Near the right handgrip.
Answers.
An off-highway motorcycle: correct answers Primarily is used for off-highway recreation and
competition.
Before risks can be managed, a rider must: correct answers Consider the consequences of
actions.
To have a margin of safety means to: correct answers Create time and space.
The primary function of helmet is to: correct answers Protect the head and brain.
Which of the following stickers indicates a helmet manufactured to meed federal requirements?
correct answers DOT and Snell
Good advice for cold weather riding is to: correct answers Dress in layers.
A good way to remember the pre-ride inspection checklist is to think: correct answers T-CLOCS
The throttle is: correct answers The right handgrip.
The clutch lever is used to: correct answers Connect power from the engine to the rear wheel.
The shift pattern on a motorcycle is: correct answers Set up to shift to higher gears by lifting the
gearshift lever.
A way to remember the engine start procedure is: correct answers FINE-C
The friction zone is used to: correct answers Control starting out from a stop.
Most of a motorcycle's stopping power is related to its: correct answers Front brake.
A motorcyclist generally divides a road lane into: correct answers Thirds.
The recommended distance to look ahead to identify hazards is: correct answers 12 seconds.
A proper technique for going over an obstacle is: correct answers Rise off the seat.
Overriding the headlights occurs when: correct answers Riding too fast for conditions at night.
Linked brakes are brakes that: correct answers Cause both brakes to be applied if either is used.
When it is necessary to respond to a close call, a rider should: correct answers Separate braking
and swerving.
, The surface of a road is most slippery when it first begins to rain because: correct answers Water
mixes with dirt and oil.
A correct procedure for a passenger to follow is to: correct answers Look over your shoulder in
the direction of turns.
A good response to a dog that chases after you is to: correct answers Upset its timing.
The two primary effectsof alcohol on riding are: correct answers Vision and judgement.
What is considered one drink: correct answers 12 ounces of beer = 5 ounces of wine = 1.5
ounces of hard liquor (one shot).
The best way to intervene when someone has had too much to drink is to: correct answers Enlist
the help of others.
Primary differences between cars and motorcycles are: correct answers Stability and
vulnerability.
Who is primarily responsible for a motorcyclist's safety? correct answers The rider.
The primary cause of motorcycle crashes is: correct answers An interaction of factors.
The primary purposes of personal protective gear are: correct answers Comfort and protection.
The retention system on a helmet is designed to: correct answers Keep the helmet in place.
Hypothermia refers to: correct answers Subnormal body temperature.
The best source of information about routine motorcycle maintenance is: correct answers The
motorcycle owner's manual.
The primary motorcycle control is: correct answers The handlebar.
To initiate lean on a motorcycle, a rider: correct answers Presses the handgrip in the direction of
the turn.
A rider changes gears by: correct answers Lifting or pressing on the shift lever.
The brakes are operated by: correct answers The right hand and the right foot.
The fuel supply valve: correct answers Controls the flow of gasoline to the engine.
The engine cut-off switch is located: correct answers Near the right handgrip.
