1|Pag e
METAL COILS ENDORSEMENT NYS EXAM|| NEW
YORK’S METAL COILS ENDORSEMENT EXAM
ALL 80 QUESTIONS AND CORRECT ANSWERS||
LATEST AND VERIFIED UPDATE 2024-2025 FULLY
COVERED|| ASSURED PASS!!!
What types of commercial vehicles are required to comply with the cargo
securement regulations? - ANSWER: trucks, truck tractors, semi-trailers, full
trailers and tractor-pole trailers with a gross vehicle weight rating of more than
10,000 lbs.
What is the minimum amount of force that a cargo securement system should be
expected to withstand when traveling on a curve, ramp or when changing lanes? -
ANSWER: The minimum side-to-side or lateral force = 50% of the cargo weight
when traveling on a curve or ramp, changing lanes or turning.
If an aluminum coil weighs 12,000 lbs., the load securement must provide 6,000
lbs. of securement to prevent movement in the rearward direction. How is this
performance criteria expressed in terms of gravity ("g")? - ANSWER: 0.5 g.
What is the definition of Working Load Limit (WLL)? - ANSWER: The
maximum load that may be applied to a component of a cargo securement system
during normal service; it is usually assigned by the manufacturer of the component.
As required by state and federal regulations, who is responsible for proper load
securement? - ANSWER: The motor carrier and driver.
A driver is required to check the cargo and its securing devices within how many
miles after beginning a trip? - ANSWER: 50 Miles
, 2|Pag e
What is the maximum working load limit of a binder with a handle marked "3/8-
G7, 7/16-G43"? - ANSWER: A. 3/8-G7 = 6,600 lbs.
B. 7/16-G43 = 7,200 lbs.
What is the working load limit of unmarked 2-inch synthetic webbing? -
ANSWER: 2,000 lbs.
If a metal coil is secured with 3/8-inch chains that do not display a grade rating,
what is the default strength rating assigned to each chain? - ANSWER: 2,650 lbs.
Transportation of one or more metal coils (individually or bundled together)
weighing 5,000 lbs. or more, must comply with which load securement
requirement? - ANSWER: Metal coil specific securement rules apply.
Endorsement "M".
How are tiedowns used to secure coils transported with eyes vertical on a flatbed
vehicle, in a sided vehicle or intermodal container with anchor points? -
ANSWER: If the coil is fastened to a pallet, the pallet must be strong enough so it
cannot collapse under the forces described in the performance criteria (Section 1).
Tiedowns must be arranged in the following manner to prevent coils from tipping
in the forward, rearward, and side-to-side (lateral) directions;
1. At least one indirect tiedown attached diagonally from the left side of the
vehicle, across the eye of the coil, to the right side of the vehicle;
2. At least one indirect tiedown attached diagonally from the right side of the
vehicle, across the eye of the coil, to the left side of the vehicle;
METAL COILS ENDORSEMENT NYS EXAM|| NEW
YORK’S METAL COILS ENDORSEMENT EXAM
ALL 80 QUESTIONS AND CORRECT ANSWERS||
LATEST AND VERIFIED UPDATE 2024-2025 FULLY
COVERED|| ASSURED PASS!!!
What types of commercial vehicles are required to comply with the cargo
securement regulations? - ANSWER: trucks, truck tractors, semi-trailers, full
trailers and tractor-pole trailers with a gross vehicle weight rating of more than
10,000 lbs.
What is the minimum amount of force that a cargo securement system should be
expected to withstand when traveling on a curve, ramp or when changing lanes? -
ANSWER: The minimum side-to-side or lateral force = 50% of the cargo weight
when traveling on a curve or ramp, changing lanes or turning.
If an aluminum coil weighs 12,000 lbs., the load securement must provide 6,000
lbs. of securement to prevent movement in the rearward direction. How is this
performance criteria expressed in terms of gravity ("g")? - ANSWER: 0.5 g.
What is the definition of Working Load Limit (WLL)? - ANSWER: The
maximum load that may be applied to a component of a cargo securement system
during normal service; it is usually assigned by the manufacturer of the component.
As required by state and federal regulations, who is responsible for proper load
securement? - ANSWER: The motor carrier and driver.
A driver is required to check the cargo and its securing devices within how many
miles after beginning a trip? - ANSWER: 50 Miles
, 2|Pag e
What is the maximum working load limit of a binder with a handle marked "3/8-
G7, 7/16-G43"? - ANSWER: A. 3/8-G7 = 6,600 lbs.
B. 7/16-G43 = 7,200 lbs.
What is the working load limit of unmarked 2-inch synthetic webbing? -
ANSWER: 2,000 lbs.
If a metal coil is secured with 3/8-inch chains that do not display a grade rating,
what is the default strength rating assigned to each chain? - ANSWER: 2,650 lbs.
Transportation of one or more metal coils (individually or bundled together)
weighing 5,000 lbs. or more, must comply with which load securement
requirement? - ANSWER: Metal coil specific securement rules apply.
Endorsement "M".
How are tiedowns used to secure coils transported with eyes vertical on a flatbed
vehicle, in a sided vehicle or intermodal container with anchor points? -
ANSWER: If the coil is fastened to a pallet, the pallet must be strong enough so it
cannot collapse under the forces described in the performance criteria (Section 1).
Tiedowns must be arranged in the following manner to prevent coils from tipping
in the forward, rearward, and side-to-side (lateral) directions;
1. At least one indirect tiedown attached diagonally from the left side of the
vehicle, across the eye of the coil, to the right side of the vehicle;
2. At least one indirect tiedown attached diagonally from the right side of the
vehicle, across the eye of the coil, to the left side of the vehicle;
