Correct Detailed Answers
Guaranteed Pass
1. What type of gloves should be warn when replacing a hot bulb?
A Latex
B cotton
C Leather
D Synthetic - ANSWER Leather
2. When should the spark plug on a electric generator be replaced?
A When it is damaged
B After three months of use
C During routine maintenance
D After five to eight months of use - ANSWER when it is damaged
3. What equipment is necessary for service testing?
A hose clamps
B chaffing blocks
c A hose-washing machine
D nozzle with shutoff valves - ANSWER Nozzle with shutoff valves
,4. What is the minimum capacity required of a fire department pumper to supply
a sprinkler Fire department connection (FDC)?
A 500 GPM
B 750 GPM
C 1,000 GPM
D 1,500 GPM - ANSWER 1,000 GPM
5. Which of the following statements about Class III standpipe system is most
accurate?
A. Class III standpipe systems are also referred to as house lines
B. Class III standpipe systems provide two 2 1/2 in. hose connections on a single
riser
C. Class III standpipe systems are designed to take the place of automatic
sprinkler system
D. Class III standpipe systems must allow both class I and Class II services to be
used simultaneously - ANSWER Class III standpipe systems must allow both
class I and Class II services to be used simultaneously
6. What strategy for providing fire and life safety messages advise firefighters to
instruct what to do rather than actions not to take?
A. Positive messages
B. Accurate messages
C. Targeted messages
D. Understandable messages - ANSWER Positive messages
7. Which type of biological/etiological hazard spreads mostly through the bite of
infected arthropods?
,A. Viruses
B. Bacteria
C. Rickettsias
D. Biological toxins - ANSWER Rickettsias
8 Which class of storage tanks do cone roof tanks belong to?
A. Non-pressure storage tank
B. Low-pressure storage tank
C. High-pressure storage tank
D. Cryogenic liquid storage tank - ANSWER Non-pressure storage tank
9. Which type of mechanical hazard occurs when a gas is rapidly released and
creates a damping shock wave that travels outward from the blast's center?
A. Seismic effect
B Explosion reactivity
C. Blast pressure-wave
D. Shrapnel fragmentation - ANSWER Blast-pressure wave
10. What type of hazardous material is associated with UN/DOT Hazard class 6
and division 6.1?
A. Explosion with a projection hazard
B. Gas poisonous by inhalation
C. Organic peroxides
D. poisonous material - ANSWER Poisonous material
, 11 What does a white background on a radioactive label indicate?
A. External radiation levels are minimal
B. External radiation levels require special handling procedures
C. The radioactive properties of the contents are negligible
D. The content emits only alpha radiation - ANSWER External radiation levels
are minimal
12 An industrial chemical that is toxic at a certain concentration and is produced
in quantities exceeding 30 tons per year at on facility is called a:
A. Poisonous chemical(PC)
B. Toxic Industrial Materials (TIM)
C. Industrial toxic materials (ITM)
D. Highly regulated toxic materials (HRTM) - ANSWER Toxic Industrial
Materials (TIM)
13 What term is used to refer to physically securing and maintaining an
emergency scene by establishing perimeters and denying entry to unauthorized
personnel?
A. Isolation
B. Quarantine
C. Establishing the hot zone
D. Barricading - ANSWER Isolation
14 Aged Chemicals:
A. Are not a hazard
B. May become unstable