BOF Quiz Questions Mod B with
verified solutions
Bolt Cutter
A barbed wired fence should be cut with a (an):
Minimum damage and proceed to maximum damage
When performing forcible entry to open a door begin with:
Report damage to tools according to department procedures
Which of the following is MOST accurate about the care and
maintenance of forcible entry tools?
Strongbacks
Which of the following is the term used for two boards connected
with long carriage bolts?
Chain Saw
Which of the following makes faster, rougher cuts when breaching a
floor?
Electronic keyless or digital locks
Which of the following may have a key pad, card reader, or
fingerprint activated screen?
Maintain situational awareness
Which of the following should be done to prevent injury when using
a saw?
True
T/F
Cutting around a lock is another way to open a resisting door.
False
T/F
Gates should be pried or cut when forcing entry to cause less
damage.
False
, T/F
Interior pocket doors can be forced with the same technique used
for sliding doors.
False
T/F
Interior walls are more difficult to breach than exterior walls.
True
T/F
No single forcible entry tool handles all situations.
True
T/F
Nontraditional types of locks provide a higher level of security.
True
T/F
Security barriers block escape routes for both firefighters and
occupants.
False
T/F
The best entry point into a burning building is to force entry
through windows.
False
T/F
The pumping mechanism for hydraulic prying tools can only be
powered.
preventing the ladder from moving away from the building.
Heeling and tying-in are two methods of:
Three
How many firefighters should be used to raise ladders 35 feet (11m)
or longer?
Wood
Ladders constructed of ______ retain strength when exposed to heat
and have better resistance to bouncing when climbed.
verified solutions
Bolt Cutter
A barbed wired fence should be cut with a (an):
Minimum damage and proceed to maximum damage
When performing forcible entry to open a door begin with:
Report damage to tools according to department procedures
Which of the following is MOST accurate about the care and
maintenance of forcible entry tools?
Strongbacks
Which of the following is the term used for two boards connected
with long carriage bolts?
Chain Saw
Which of the following makes faster, rougher cuts when breaching a
floor?
Electronic keyless or digital locks
Which of the following may have a key pad, card reader, or
fingerprint activated screen?
Maintain situational awareness
Which of the following should be done to prevent injury when using
a saw?
True
T/F
Cutting around a lock is another way to open a resisting door.
False
T/F
Gates should be pried or cut when forcing entry to cause less
damage.
False
, T/F
Interior pocket doors can be forced with the same technique used
for sliding doors.
False
T/F
Interior walls are more difficult to breach than exterior walls.
True
T/F
No single forcible entry tool handles all situations.
True
T/F
Nontraditional types of locks provide a higher level of security.
True
T/F
Security barriers block escape routes for both firefighters and
occupants.
False
T/F
The best entry point into a burning building is to force entry
through windows.
False
T/F
The pumping mechanism for hydraulic prying tools can only be
powered.
preventing the ladder from moving away from the building.
Heeling and tying-in are two methods of:
Three
How many firefighters should be used to raise ladders 35 feet (11m)
or longer?
Wood
Ladders constructed of ______ retain strength when exposed to heat
and have better resistance to bouncing when climbed.
