S-95 (FDNY) WITH
VERIFIED SOLUTIONS
Analog (intelligent) Smoke Detectors - answer shall be cleaned no
later than one (1) week from receipt of an indication of the need for
cleaning.
Smoke detectors - answer MUST BE: (1) cleaned not less than once
every six (6) months
(2) tested for smoke entry not less than once a year.
Smoke, beam, and duct detectors - answer (1) Activated by
detection of particles of combustion
(2) causes Fire Alarm
(3) normally resets when the reset button is pressed at the FACP if
the condition activating the detector has been cleared.
Must be protected from the entrance of foreign particles that may
be airborne. Ex: Dust from cutting wood, sheet rock or sanding may
trigger a false alarm.
Heat detectors - answer (1) Activated by abnormally high
temperature (fixed temperature detector) or rapid temperature rise
(rate of rise detector).
(2) causes Fire Alarm
Fixed temperature heat detectors - answer After activation most
detectors will NOT self restore and will require replacement by a
qualified service technician.
, Rate of rise heat detectors - answer will normally self-restore after
activation.
Water-flow device - answer (1) Activated by Flow of water in a
sprinkler system
(2) causes fire alarm signal
(3) Device should return to normal when water ceases to flow.
Manual Pull Station - answer (1) Activated by manually pulling
handle
(2) causes fire alarm
(3) Return handle to normal position. A key or other method may be
required to reset the station to a normal condition.
Primary power source - answer shall be generated electric power
not exceeding 277/480 volts, supplied by utility company power or
isolated plant
Duties performed by CoF S-95 - answer (1) Visual inspection of
smoke detectors
(2) Visual inspection of other fire alarm system components
Primary purpose of fire alarm systems - answer to warn building
occupants and transmit signals indicating a fire condition to the fire
department via an FDNY approved central station company.
3 Types of Signals Initiated by FACP - answer *Fire Alarm Signal
*Supervisory Signal
*Trouble Signal
VERIFIED SOLUTIONS
Analog (intelligent) Smoke Detectors - answer shall be cleaned no
later than one (1) week from receipt of an indication of the need for
cleaning.
Smoke detectors - answer MUST BE: (1) cleaned not less than once
every six (6) months
(2) tested for smoke entry not less than once a year.
Smoke, beam, and duct detectors - answer (1) Activated by
detection of particles of combustion
(2) causes Fire Alarm
(3) normally resets when the reset button is pressed at the FACP if
the condition activating the detector has been cleared.
Must be protected from the entrance of foreign particles that may
be airborne. Ex: Dust from cutting wood, sheet rock or sanding may
trigger a false alarm.
Heat detectors - answer (1) Activated by abnormally high
temperature (fixed temperature detector) or rapid temperature rise
(rate of rise detector).
(2) causes Fire Alarm
Fixed temperature heat detectors - answer After activation most
detectors will NOT self restore and will require replacement by a
qualified service technician.
, Rate of rise heat detectors - answer will normally self-restore after
activation.
Water-flow device - answer (1) Activated by Flow of water in a
sprinkler system
(2) causes fire alarm signal
(3) Device should return to normal when water ceases to flow.
Manual Pull Station - answer (1) Activated by manually pulling
handle
(2) causes fire alarm
(3) Return handle to normal position. A key or other method may be
required to reset the station to a normal condition.
Primary power source - answer shall be generated electric power
not exceeding 277/480 volts, supplied by utility company power or
isolated plant
Duties performed by CoF S-95 - answer (1) Visual inspection of
smoke detectors
(2) Visual inspection of other fire alarm system components
Primary purpose of fire alarm systems - answer to warn building
occupants and transmit signals indicating a fire condition to the fire
department via an FDNY approved central station company.
3 Types of Signals Initiated by FACP - answer *Fire Alarm Signal
*Supervisory Signal
*Trouble Signal
