PIPEFITTER NCEER CERTIFICATION EXAM
What are the 5 characteristics of companies with a strong safety culture? - ANSWER
1) fewer at - risk behaviors
2) lower incident and accident rates
3) less turnover
4) lower absenteeism
5) higher productivity
The ultimate responsibility for on - the - job safety rests with who ? - ANSWER
Yourself
Safety is a (2 answers) - ANSWER -leanred behavior and attitude
A safety culture is created when - ANSWER All the workers at the job site or in a
company see the value of a safe work enviroment and support it through their
actions
OSHA stands for - ANSWER Occupational safety and Health Administration
What does OSHA do? - ANSWER Ensures safe working conditons for workers by
setting and enforcing standards and by providing training, outreach, and education
What are the catagorizes incidents and accident are sorted in to based on severity -
ANSWER 1) near-miss: could of happened
2) minor injury: able to work
3) serious/disabling injury: lost time- missing work
4) fatalities: death
What are the 4 leading causes of death "Fatal four" / "Focus Four" - ANSWER 1)
Fall
2) Struck by hazards
3) Electrical hazards
4) caught in caught between
Incidents and Accidents causes (provide an example for each) (10) - ANSWER 1)
failure to communicate
Ex: company not posting correct signage
2) At-Risk Work Habits
Ex: procrastination
3) Alcohol and Drug Abuse
Ex: many prescriptions and otc drugs
4) Lack of Skill
Ex: never operate a machine without proper training
5) Intentional Acts
Ex: Terrorism
6) Unsafe Acts
Ex: not wearing correct PPE
, 7) Rationalizing Risk
Ex: endangering yourself bc you think its justified (unclipping for a second)
8) Unsafe conditions
Ex: congested workplace
9) Poor Housekeeping
Ex: not being organized or clean
10) Management System Failure
Ex: not posting signage
What are the 4 signs and their colors? - ANSWER Informational: Blue and White
Safety Signs: Green and White
Danger Signs: Red
Caution Signs: Yellow and Black
What does HAZCOM stand for and what is its purpose? - ANSWER Hazard
Communication Standard - requires employer to tell you about hazardous materials
on site
What are some sources of energy - ANSWER Electrical, Hydrolic, pneumatic
Tasks are broken down into parts idividually analyzed for its hazards, actions to
correct hazards, pre planning tools - ANSWER Job Safety Analysis (JSA) or Job
Hazard Analysis (JHA), or Task Safety Analysis (TSA)
Risk is the measure of: - ANSWER Probability: the chance a given event will occur
Consequences: the results of an action/condition/event
Exposure: amount of time &/or degree someone is exposed to an unsafe condition
Which injuries , incidents , and near - misses should be reported ? - ANSWER Any
Fact sheets prepared by the manufacturer or imported that gives information on
hazardous materials - ANSWER Safety Data Sheets (SDS)
What is the 6 ft rule? - ANSWER When your 6 ft or more up your required to have
fall protection
2 types of protection for unprotected sides, wall openings, and floor holes -
ANSWER -gaurded (barricades)
-covered
What are the requirements for hole covers (3) - ANSWER -must be labeled and
secured
-cover any hole
-cleated, wired, or secured to prevent from slipping
General fall prevention measures (3) - ANSWER -clean job site
-run cables, cords, and hoses overhead or through crossover plates
-DO NOT RUN
What are the 5 characteristics of companies with a strong safety culture? - ANSWER
1) fewer at - risk behaviors
2) lower incident and accident rates
3) less turnover
4) lower absenteeism
5) higher productivity
The ultimate responsibility for on - the - job safety rests with who ? - ANSWER
Yourself
Safety is a (2 answers) - ANSWER -leanred behavior and attitude
A safety culture is created when - ANSWER All the workers at the job site or in a
company see the value of a safe work enviroment and support it through their
actions
OSHA stands for - ANSWER Occupational safety and Health Administration
What does OSHA do? - ANSWER Ensures safe working conditons for workers by
setting and enforcing standards and by providing training, outreach, and education
What are the catagorizes incidents and accident are sorted in to based on severity -
ANSWER 1) near-miss: could of happened
2) minor injury: able to work
3) serious/disabling injury: lost time- missing work
4) fatalities: death
What are the 4 leading causes of death "Fatal four" / "Focus Four" - ANSWER 1)
Fall
2) Struck by hazards
3) Electrical hazards
4) caught in caught between
Incidents and Accidents causes (provide an example for each) (10) - ANSWER 1)
failure to communicate
Ex: company not posting correct signage
2) At-Risk Work Habits
Ex: procrastination
3) Alcohol and Drug Abuse
Ex: many prescriptions and otc drugs
4) Lack of Skill
Ex: never operate a machine without proper training
5) Intentional Acts
Ex: Terrorism
6) Unsafe Acts
Ex: not wearing correct PPE
, 7) Rationalizing Risk
Ex: endangering yourself bc you think its justified (unclipping for a second)
8) Unsafe conditions
Ex: congested workplace
9) Poor Housekeeping
Ex: not being organized or clean
10) Management System Failure
Ex: not posting signage
What are the 4 signs and their colors? - ANSWER Informational: Blue and White
Safety Signs: Green and White
Danger Signs: Red
Caution Signs: Yellow and Black
What does HAZCOM stand for and what is its purpose? - ANSWER Hazard
Communication Standard - requires employer to tell you about hazardous materials
on site
What are some sources of energy - ANSWER Electrical, Hydrolic, pneumatic
Tasks are broken down into parts idividually analyzed for its hazards, actions to
correct hazards, pre planning tools - ANSWER Job Safety Analysis (JSA) or Job
Hazard Analysis (JHA), or Task Safety Analysis (TSA)
Risk is the measure of: - ANSWER Probability: the chance a given event will occur
Consequences: the results of an action/condition/event
Exposure: amount of time &/or degree someone is exposed to an unsafe condition
Which injuries , incidents , and near - misses should be reported ? - ANSWER Any
Fact sheets prepared by the manufacturer or imported that gives information on
hazardous materials - ANSWER Safety Data Sheets (SDS)
What is the 6 ft rule? - ANSWER When your 6 ft or more up your required to have
fall protection
2 types of protection for unprotected sides, wall openings, and floor holes -
ANSWER -gaurded (barricades)
-covered
What are the requirements for hole covers (3) - ANSWER -must be labeled and
secured
-cover any hole
-cleated, wired, or secured to prevent from slipping
General fall prevention measures (3) - ANSWER -clean job site
-run cables, cords, and hoses overhead or through crossover plates
-DO NOT RUN