CLCP STUDY GUIDE
PART 2 | 179
QUESTIONS | WITH
COMPLETE
SOLUTIONS!!
CLCP
Evatee 9/23/24 CLCP
,CLCP STUDY GUIDE PART 2 | 179 QUESTIONS
| WITH COMPLETE SOLUTIONS!!
What is the most important criterion to identify in a building automation
system (BAS)? Answer - What is the intent of the BAS
What is building automation integration? Answer - Integration that provides
communication and coordinated triggers between each system
MSI consultants can be an LCSI. Answer - true
Specifying integration is important because _____. Answer - Integrators will
ensure that a control system is installed and programmed correctly
Integrators may be overlooked during project bidding
Integration is essential for complex controls projects
What division is lighting controls commonly specified under? Answer - Division
26
A _____ is a document used to identify devices and triggers in a BAS. Answer -
Sequence of Operations
What division is a BAS always specified under? Answer - There is no single
division that it is specified under
A(n) _____ is an interface that acts as a central point of contact for various
devices. Answer - Field controller
, When should you consider using an LCSI for a lighting control system project?
Answer - Whenever DMX is specified
Whenever an open protocol and a proprietary protocol are used together
Whenever the system has multiple manufacturers
Historically, integration of lighting control systems has been a part of BAS
design since the 1980s. Answer - True
Toplighting describes daylighting using _____. Answer - Skylights and similar
ceiling aperture
Sidelighting describes daylighting using _____. Answer - Windows and similar
wall apertures
In spaces where critical stationary tasks are performed, to avoid glare, daylight
should be distributed as both uniform and highly _____. Answer - Diffuse
Daylight control and daylight harvesting control are two different things.
Answer - True
Daylight-responsive lighting control is primarily _____ control strategy. Answer
- An automatic
The purpose of daylight-responsive lighting control is to save energy by
reducing _____ in some proportion to an increase in _____ in a space. Answer
- Electric light levels ; daylight levels
PART 2 | 179
QUESTIONS | WITH
COMPLETE
SOLUTIONS!!
CLCP
Evatee 9/23/24 CLCP
,CLCP STUDY GUIDE PART 2 | 179 QUESTIONS
| WITH COMPLETE SOLUTIONS!!
What is the most important criterion to identify in a building automation
system (BAS)? Answer - What is the intent of the BAS
What is building automation integration? Answer - Integration that provides
communication and coordinated triggers between each system
MSI consultants can be an LCSI. Answer - true
Specifying integration is important because _____. Answer - Integrators will
ensure that a control system is installed and programmed correctly
Integrators may be overlooked during project bidding
Integration is essential for complex controls projects
What division is lighting controls commonly specified under? Answer - Division
26
A _____ is a document used to identify devices and triggers in a BAS. Answer -
Sequence of Operations
What division is a BAS always specified under? Answer - There is no single
division that it is specified under
A(n) _____ is an interface that acts as a central point of contact for various
devices. Answer - Field controller
, When should you consider using an LCSI for a lighting control system project?
Answer - Whenever DMX is specified
Whenever an open protocol and a proprietary protocol are used together
Whenever the system has multiple manufacturers
Historically, integration of lighting control systems has been a part of BAS
design since the 1980s. Answer - True
Toplighting describes daylighting using _____. Answer - Skylights and similar
ceiling aperture
Sidelighting describes daylighting using _____. Answer - Windows and similar
wall apertures
In spaces where critical stationary tasks are performed, to avoid glare, daylight
should be distributed as both uniform and highly _____. Answer - Diffuse
Daylight control and daylight harvesting control are two different things.
Answer - True
Daylight-responsive lighting control is primarily _____ control strategy. Answer
- An automatic
The purpose of daylight-responsive lighting control is to save energy by
reducing _____ in some proportion to an increase in _____ in a space. Answer
- Electric light levels ; daylight levels
