AMT 2 STUDY GUIDE | 100% Correct Answers | Verified |
Latest 2024 Version
Amtrak Conductors and Engineer are classified as class ______ employees - (ANSWER)C.
[1.103]
Should employees in electrified territory be familiar with the location and operation of radios and
telephones? - (ANSWER)Yes [1.204]
When using railroad telephone lines or radios, and you hear the word "EMERGENCY" repeated
three times, what must be done? - (ANSWER)All others using the phone line or radio channel
must yield immediately. [1.205]
All occurrences or conditions which are likely to affect electric Operations must be reported
immediately to whom? - (ANSWER)The Power Director/Train Dispatcher. [1.201]
Minimum Approach Distance means? - (ANSWER)The distance that must be maintained
between personnel and or equipment and all exposed energized lines. Minimum Approach
Distance is measured between the person or the end of a tool, equipment, or material being used
and the exposed energized parts. [1.301]
All overhead wires must be considered energized (Live) at all times except? - (ANSWER)When
it is known to be de-energized, tested de-energized and grounded. [1.302]
The third rail must be considered energized (live) at all times except? - (ANSWER)When it is
known to be de-energized, tested de-energized and a Third Rail Warning Device is applied.
[1.303]
Electric engines and Multiple Units (MU) under overhead wires must be considered energized
(Live) except? - (ANSWER)When it is known that all Pantographs are down and Pantograph
grounding switches are closed, or overhead wires are de-energized, tested de-energized and
properly grounded. [1.501]
, Can employees touch or remove unidentified dangling wires, trees, or foreign objects in contact
with overhead wires or third rail? - (ANSWER)NO ,employees must take necessary precautions
to protect others and equipment and maintain Minimum Approach Distance . [1.206]
Conductive material such as steel tape measure, wire, wet or non-rated rope, or linen tape-line
containing metallic reinforcement can be used around energized wire, apparatus, equipment, or
third rail. True or False? - (ANSWER)False. [1.114]
The Minimum Approach Distance for AMT-2 Qualified Employees whether or not protected by
Class A employee against Transmission Wires energized or de-energized and not grounded is? -
(ANSWER)8ft. [Table 1]
What is the Minimum Approach Distance for AMT-2 Qualified Employee whether or not
protected by a Class A employee against the Catenary, Signal Line, and Utility Wires less than
35000 volts, energized or de-energized and not grounded? - (ANSWER)3ft. [Table 1]
What is the Minimum Approach Distance for AMT-2 Qualified Employees against Transmission
Wires for equipment operating in the vicinity of wires energized or de-energized and not
grounded? - (ANSWER)15ft. [Table 1]
The Minimum Approach Distance for AMT-2 Qualified Employees against Catenary, Signal
Line, Utility Wires Less than 35000 volts for Equipment operating in the vicinity of wires
energized or de-energized and not grounded is/ - (ANSWER)3ft. [Table 1]
Personnel and Equipment being provided protection by Class A Employee, wires de-energized,
tested de-energized, and grounded will be allowed? - (ANSWER)Full Contact. [Table 1]
The Minimum Approach Distance for Unidentified Dangling Wires is? - (ANSWER)15ft. [Table
1]
What is the Minimum Approach Distance while walking over and around energized Third Rail? -
(ANSWER)6 inches. [Table 2]
Latest 2024 Version
Amtrak Conductors and Engineer are classified as class ______ employees - (ANSWER)C.
[1.103]
Should employees in electrified territory be familiar with the location and operation of radios and
telephones? - (ANSWER)Yes [1.204]
When using railroad telephone lines or radios, and you hear the word "EMERGENCY" repeated
three times, what must be done? - (ANSWER)All others using the phone line or radio channel
must yield immediately. [1.205]
All occurrences or conditions which are likely to affect electric Operations must be reported
immediately to whom? - (ANSWER)The Power Director/Train Dispatcher. [1.201]
Minimum Approach Distance means? - (ANSWER)The distance that must be maintained
between personnel and or equipment and all exposed energized lines. Minimum Approach
Distance is measured between the person or the end of a tool, equipment, or material being used
and the exposed energized parts. [1.301]
All overhead wires must be considered energized (Live) at all times except? - (ANSWER)When
it is known to be de-energized, tested de-energized and grounded. [1.302]
The third rail must be considered energized (live) at all times except? - (ANSWER)When it is
known to be de-energized, tested de-energized and a Third Rail Warning Device is applied.
[1.303]
Electric engines and Multiple Units (MU) under overhead wires must be considered energized
(Live) except? - (ANSWER)When it is known that all Pantographs are down and Pantograph
grounding switches are closed, or overhead wires are de-energized, tested de-energized and
properly grounded. [1.501]
, Can employees touch or remove unidentified dangling wires, trees, or foreign objects in contact
with overhead wires or third rail? - (ANSWER)NO ,employees must take necessary precautions
to protect others and equipment and maintain Minimum Approach Distance . [1.206]
Conductive material such as steel tape measure, wire, wet or non-rated rope, or linen tape-line
containing metallic reinforcement can be used around energized wire, apparatus, equipment, or
third rail. True or False? - (ANSWER)False. [1.114]
The Minimum Approach Distance for AMT-2 Qualified Employees whether or not protected by
Class A employee against Transmission Wires energized or de-energized and not grounded is? -
(ANSWER)8ft. [Table 1]
What is the Minimum Approach Distance for AMT-2 Qualified Employee whether or not
protected by a Class A employee against the Catenary, Signal Line, and Utility Wires less than
35000 volts, energized or de-energized and not grounded? - (ANSWER)3ft. [Table 1]
What is the Minimum Approach Distance for AMT-2 Qualified Employees against Transmission
Wires for equipment operating in the vicinity of wires energized or de-energized and not
grounded? - (ANSWER)15ft. [Table 1]
The Minimum Approach Distance for AMT-2 Qualified Employees against Catenary, Signal
Line, Utility Wires Less than 35000 volts for Equipment operating in the vicinity of wires
energized or de-energized and not grounded is/ - (ANSWER)3ft. [Table 1]
Personnel and Equipment being provided protection by Class A Employee, wires de-energized,
tested de-energized, and grounded will be allowed? - (ANSWER)Full Contact. [Table 1]
The Minimum Approach Distance for Unidentified Dangling Wires is? - (ANSWER)15ft. [Table
1]
What is the Minimum Approach Distance while walking over and around energized Third Rail? -
(ANSWER)6 inches. [Table 2]
