• Wrong document? Swap it for free
  • Written by students who passed
  • Immediately available after payment
  • Read online or as PDF
Sell
Where do you study
Your language
Document preview thumbnail
Preview 2 out of 6 pages
Exam (elaborations)

Engineering NOCTI

Document preview thumbnail
Preview 2 out of 6 pages

CAD - answer-Computer Aided Drafting/Design ANSI - answer-American National Standards Institute ISO - answer-International Standards Organization Mockup - answer-A nonfunctional model devised to expose its parts for study, training or testing. Systems Model - answer-Input - process - output - feedback 7 resources of input - answer-time, energy, tools, materials, people, capital, information Types of outputs - answer-expected, unexpected, desirable, undesirable Engineering Design Process - answer-Step 1: Define the problem Step 2: Research the problem Step 3: Imagine - develop possible solutions Step 4: Plan - choose the best solution Step 5: Create a prototype Step 6: Evaluate & Improve - test the prototype and make needed adjustments Step 7: Communicate - Share the results Prototype - answer-A full-scale working model used to test a design concept by making actual observations and necessary adjustments. OSHA - answer-Occupational Safety and Health Administration, a government agency in the Department of Labor to maintain a safe and healthy work environment Lathe - answer-A machine used for shaping by turning material. Six simple machines - answer-Pulley Lever Wheel and Axel Wedge Screw Plane Shear - answer-Sliding force Tension - answer-Pulling force Compression - answer-A force that pushes on or squeezes a material. Bending - answer-Compression and tension force Torsion - answer-act of twisting; stress due to twisting forces exerted Consensus is a - answer-general agreement The technician should use a ___________ to cut a keyway in a shaft. - answer-milling machine OEM - answer-Original Equipment Manufacturer Forging - answer-A process by which metal is heated and shaped by plastic deformation by suitably applying compressive force. Ergonomics - answer-The study of workplace equipment design or how to arrange and design devices, machines, or workspace so that people and things interact safely and most efficiently. Which of the following is a ferrous metal? a. aluminum b. copper c. magnesium d. mild steel - answer-d. mild steel Which of the following is the earliest example of engineering? a. Gutenberg press b. Moving assembly line c. Archimedes screw d. Cloth weaving loom - answer-c. Archimedes screw Which of the following is an example of an inextinguishable energy source? a. Wind b. Nuclear c. Natural gas d. Coal - answer-a. Wind A video game company would like to test a new game controller design. Which of the following would be the best way for them to start testing the comfort and effectiveness of the controller? a. Mockup b. Prototype c. Scale model d. Sample - answer-b. Prototype The branch of engineering that combines physical science, life science, mathematics, and economics to processes that convert raw materials info more valuable forms is called ______________ engineering. - answer-Chemical The main components of the engineering design process include identifying, defining, selecting, implementing, and ______________. - answer-Evaluating Using Ohm's Law, how much current is going through the following circuit? 15.5 and 5 Ohms resistance - answer-3.1 amps Which step of problem solving helps to determine if a certain product is of value? a. Identify possible solutions b. Identify the problem c. Implementation d. Evaluation - answer-d. Evaluation Tom wants to research how materials and parts move through his plant in order to see where and how the company may be able to increase productivity. This is the study of _________________. - answer-Production flow What is the cubic area of the object that is 5 ft long, 2.5 ft wide, and 3.5 ft tall? - answer-43.75 ft^3 In the engineering design process, stating the problem is the _________ step. - answer-first What does this symbol stand for? x̄ (x-bar) - answer-mean What does this symbol stand for? σ - answer-standard deviation What does this symbol stand for? Σ (sigma) - answer-sum of Using the information given, determine the break-even point. Fixed costs = $35,000 Variable cost per unit = $1,500 unit price = $2,000 - answer-70 units The core concepts of technology are ______________. a. Skillful research, ethical behavior, and cooperative group b. Skillful research, cooperative groups, and critical thinking c. Technical writing, ethical behavior, and critical thinking d. Skillful research, ethical behavior, and critical thinking - answer-d. Skillful research, ethical behavior, and critical thinking The proper second step to refine a potential product is __________ a. Modify b. Reset c. Build product d. Test - answer-d. Test Which of the following formulas is used to determine the area of a circle? a. A = πr^2 b. A = 1/2bh c. A = LxWxH d. A = 2πr - answer-a. A = πr^2 In order to reduce friction between a workpiece and a cutting site, _____________ is used. - answer-cutting fluid A steel container weighing 90 pounds has a coefficient of friction equaling 0.61. How much force is required to move this box on a dry and clean surface? - answer-54.9 lbs The ability of a material to be stretched into a longer, thinner shape is called a. Conductivity b. Malleability c. Hardness d. Ductility -

Content preview

ENGINEERING NOCTI EXAM
CAD - answer-Computer Aided Drafting/Design

ANSI - answer-American National Standards Institute

ISO - answer-International Standards Organization

Mockup - answer-A nonfunctional model devised to expose its parts for study, training or testing.

Systems Model - answer-Input -> process -> output -> feedback

7 resources of input - answer-time, energy, tools, materials, people, capital, information

Types of outputs - answer-expected, unexpected, desirable, undesirable

Engineering Design Process - answer-Step 1: Define the problem
Step 2: Research the problem
Step 3: Imagine - develop possible solutions
Step 4: Plan - choose the best solution
Step 5: Create a prototype
Step 6: Evaluate & Improve - test the prototype and make needed adjustments
Step 7: Communicate - Share the results

Prototype - answer-A full-scale working model used to test a design concept by making actual
observations and necessary adjustments.

OSHA - answer-Occupational Safety and Health Administration, a government agency in the Department
of Labor to maintain a safe and healthy work environment

Lathe - answer-A machine used for shaping by turning material.

Six simple machines - answer-Pulley
Lever
Wheel and Axel
Wedge
Screw
Plane

Shear - answer-Sliding force

Tension - answer-Pulling force

Compression - answer-A force that pushes on or squeezes a material.

Bending - answer-Compression and tension force

, Torsion - answer-act of twisting; stress due to twisting forces exerted

Consensus is a - answer-general agreement

The technician should use a ___________ to cut a keyway in a shaft. - answer-milling machine

OEM - answer-Original Equipment Manufacturer

Forging - answer-A process by which metal is heated and shaped by plastic deformation by suitably
applying compressive force.

Ergonomics - answer-The study of workplace equipment design or how to arrange and design devices,
machines, or workspace so that people and things interact safely and most efficiently.

Which of the following is a ferrous metal?
a. aluminum
b. copper
c. magnesium
d. mild steel - answer-d. mild steel

Which of the following is the earliest example of engineering?
a. Gutenberg press
b. Moving assembly line
c. Archimedes screw
d. Cloth weaving loom - answer-c. Archimedes screw

Which of the following is an example of an inextinguishable energy source?
a. Wind
b. Nuclear
c. Natural gas
d. Coal - answer-a. Wind

A video game company would like to test a new game controller design. Which of the following would
be the best way for them to start testing the comfort and effectiveness of the controller?
a. Mockup
b. Prototype
c. Scale model
d. Sample - answer-b. Prototype

The branch of engineering that combines physical science, life science, mathematics, and economics to
processes that convert raw materials info more valuable forms is called ______________ engineering. -
answer-Chemical

The main components of the engineering design process include identifying, defining, selecting,
implementing, and ______________. - answer-Evaluating

Using Ohm's Law, how much current is going through the following circuit?
15.5 and 5 Ohms resistance - answer-3.1 amps

Document information

Uploaded on
September 16, 2024
Number of pages
6
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers
$11.49

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
TOPDOCTOR
5.0
(1)
Sold
10
Followers
5
Items
3387
Last sold
1 year ago




Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions