AMT2 Exam Questions with correct
Answers
who selects and designates QA personnel - Answer -EO
Who maintains the units master library of applicable technical pubs and directives -
Answer -QA
3 cause of FOD - Answer -Poor housekeeping, maintenance practices and
carelessness
What does JOAP stand for - Answer -Joint Oil Analysis Program
Who provides funds directly to DOD for USCG participation in JOAP - Answer -CG-
41(office of AreoENG)
Who provides oil and debris analysis for the MH-65 - Answer -Turbomeca
Fuel samples should be kept for a period of XX hours - Answer -24
Normal level of fuel system inhibitor in turbine fuel is - Answer -.07-.15% by volume
How many degrees F will ice inhibitor lower the flash point of JP5 - Answer -4*
Dehumidification carts for at least 8 hours per day will reduce avionics failure by what %
- Answer -40
Who shall ensure that an effective Cal program is implemented for tools - Answer -CO
Investigation study and controls of compromising emanations from electronic equip -
Answer -TEMPEST
Who will provide CG-41 with TEMPEST policy - Answer -CG-65(cybersecurity and
comm policy
Who will oversee the USCG aviation TEMPEST program - Answer -CG-41(AeroEng)
,Who shall manage the USCG TEMPEST policy - Answer -ALC
TCR - Answer -TEMPEST countermeasure reviews
ACCB - Answer -Aircraft configuration control board
CTTA - Answer -Certified TEMPEST Technical Authority
SAMI - Answer -Single Action Maintenance Instruction
CAMI - Answer -Continuing Action maintenance instruction
Interlock circuit shall not draw more than XX milliamperes from a 28VDC circuit -
Answer -20milli
TIMI - Answer -Technical information maintenance instruction
What resins are not authorized for use on CG aircraft - Answer -Polyester
Aviation confined space entry engineer will normally be - Answer -QA officer, AEO or
Maintenance officer
Who has the responsibility for determining if a fuel system is safe from fire, explosion
and oxygen deficiency - Answer -Entry Authority
EA certification is valid for XX years - Answer -1
Who will evaluate new AC spare parts introduced into Aviation Inventory Control Point
supply system - Answer -ALC
Only chemicals on the AC particular XXXX may be procured or stocked by the
engineering department for routine maintenance - Answer -ACL
What primers are not authorized for use at USCG aviation units - Answer -
MILPRF23377 Type 1, Class C1/2
What form do you use to change the ACL - Answer -CG-22
Who may authorize an one time purchase of chemicals not on the ACL - Answer -EO
Prototyping of chemicals approved by - Answer -ISM(industrial systems manager) or
ALC Product Line
Who must continuously pursue an aggressive program for EWIS (Electrical Wiring
Interconnect system) integrity to maintain reliability and safety - Answer -ALC
, When is the opportune time to establish EWIS program - Answer -PDM
Maintenance personnel should be scheduled based on a goal of XX hours
workweek/shift - Answer -40
Who may authorize the exceedance of established limits to meet urgent operational
requirements - Answer -CO
>10 hours of work/>8 hours in RED ZONE(excludes reverse cycle or midshift
personnel) 0300-sunrise/>8 hours while performing flight/maintenance duty decided by -
Answer -maintenance release authority notifying EO
>12hours - Answer -decided by EO notifying CO
>16 hours - Answer -CO
Personnel shall not perform maintenance or QA inspections on grounding discrepancies
or flight control work beyond XX hours with prior EO authorization - Answer -12 hours
Personnel may not perform AC maintenance or activities with XX hours of alcohol use -
Answer -10 hours
. Lathes, milling machine and Etc. should be set XX degrees angles to each other -
Answer -15*
Metal hood type guards shall enclose XX of abrasive wheel - Answer -2/3s
Tool rests shall be adjusted to provide a minimum of XX inch from abrasive wheel -
Answer -1/8th
Nickel-cadmium battery shops will be mechanically ventilated - Answer -3 to 4 air
changes per hour
what should you not do with vented lead acid batteries and nickel cadmium batteries at
the same time? - Answer -service them in the same room
Sealed lead-acid and sealed nickel-cadmium batteries require XX feet of separation -
Answer -5 Feet
Floors and battery racks shall be constructed from - Answer -acid resistance material or
paint
Battery shop personnel shall wear - Answer -Rubber gloves, protective eye glasses and
clothing
Answers
who selects and designates QA personnel - Answer -EO
Who maintains the units master library of applicable technical pubs and directives -
Answer -QA
3 cause of FOD - Answer -Poor housekeeping, maintenance practices and
carelessness
What does JOAP stand for - Answer -Joint Oil Analysis Program
Who provides funds directly to DOD for USCG participation in JOAP - Answer -CG-
41(office of AreoENG)
Who provides oil and debris analysis for the MH-65 - Answer -Turbomeca
Fuel samples should be kept for a period of XX hours - Answer -24
Normal level of fuel system inhibitor in turbine fuel is - Answer -.07-.15% by volume
How many degrees F will ice inhibitor lower the flash point of JP5 - Answer -4*
Dehumidification carts for at least 8 hours per day will reduce avionics failure by what %
- Answer -40
Who shall ensure that an effective Cal program is implemented for tools - Answer -CO
Investigation study and controls of compromising emanations from electronic equip -
Answer -TEMPEST
Who will provide CG-41 with TEMPEST policy - Answer -CG-65(cybersecurity and
comm policy
Who will oversee the USCG aviation TEMPEST program - Answer -CG-41(AeroEng)
,Who shall manage the USCG TEMPEST policy - Answer -ALC
TCR - Answer -TEMPEST countermeasure reviews
ACCB - Answer -Aircraft configuration control board
CTTA - Answer -Certified TEMPEST Technical Authority
SAMI - Answer -Single Action Maintenance Instruction
CAMI - Answer -Continuing Action maintenance instruction
Interlock circuit shall not draw more than XX milliamperes from a 28VDC circuit -
Answer -20milli
TIMI - Answer -Technical information maintenance instruction
What resins are not authorized for use on CG aircraft - Answer -Polyester
Aviation confined space entry engineer will normally be - Answer -QA officer, AEO or
Maintenance officer
Who has the responsibility for determining if a fuel system is safe from fire, explosion
and oxygen deficiency - Answer -Entry Authority
EA certification is valid for XX years - Answer -1
Who will evaluate new AC spare parts introduced into Aviation Inventory Control Point
supply system - Answer -ALC
Only chemicals on the AC particular XXXX may be procured or stocked by the
engineering department for routine maintenance - Answer -ACL
What primers are not authorized for use at USCG aviation units - Answer -
MILPRF23377 Type 1, Class C1/2
What form do you use to change the ACL - Answer -CG-22
Who may authorize an one time purchase of chemicals not on the ACL - Answer -EO
Prototyping of chemicals approved by - Answer -ISM(industrial systems manager) or
ALC Product Line
Who must continuously pursue an aggressive program for EWIS (Electrical Wiring
Interconnect system) integrity to maintain reliability and safety - Answer -ALC
, When is the opportune time to establish EWIS program - Answer -PDM
Maintenance personnel should be scheduled based on a goal of XX hours
workweek/shift - Answer -40
Who may authorize the exceedance of established limits to meet urgent operational
requirements - Answer -CO
>10 hours of work/>8 hours in RED ZONE(excludes reverse cycle or midshift
personnel) 0300-sunrise/>8 hours while performing flight/maintenance duty decided by -
Answer -maintenance release authority notifying EO
>12hours - Answer -decided by EO notifying CO
>16 hours - Answer -CO
Personnel shall not perform maintenance or QA inspections on grounding discrepancies
or flight control work beyond XX hours with prior EO authorization - Answer -12 hours
Personnel may not perform AC maintenance or activities with XX hours of alcohol use -
Answer -10 hours
. Lathes, milling machine and Etc. should be set XX degrees angles to each other -
Answer -15*
Metal hood type guards shall enclose XX of abrasive wheel - Answer -2/3s
Tool rests shall be adjusted to provide a minimum of XX inch from abrasive wheel -
Answer -1/8th
Nickel-cadmium battery shops will be mechanically ventilated - Answer -3 to 4 air
changes per hour
what should you not do with vented lead acid batteries and nickel cadmium batteries at
the same time? - Answer -service them in the same room
Sealed lead-acid and sealed nickel-cadmium batteries require XX feet of separation -
Answer -5 Feet
Floors and battery racks shall be constructed from - Answer -acid resistance material or
paint
Battery shop personnel shall wear - Answer -Rubber gloves, protective eye glasses and
clothing
