AVIXA CTS-D: Structural and Mechanical Considerations Exam Study Guide with Complete Solutions

AVIXA CTS-D: Structural and Mechanical Considerations Exam Study Guide with Complete Solutions EMP - Energy Management Plan - Answer️️ -Identifies Energy Reduction Points EMM - Energy Management Manager - Answer️️ -A role that provides leadership and management of the system Wiring Diagram in terms of Energy management - Answer️️ -illustrates how power to AV components is controlled and monitored and how the energy management system is connected to the AV system Visual Display in terms of Energy Management - Answer️️ -Shows users and management the continuous power usage of the AV system Use of Automated Devices and Power-State Changes in terms of energy management - Answer️️ -Ensure the AV system is energy-efficient Method for Continuous Power Measurement - Answer️️ -Collect power consumption data End-user Operation Training - Answer️️ -leads to understanding, participation, and behavior modification Tree ideas to the energy management standard - Answer️️ -Data collection, automation, education and training ©SOPHIABENNETT EXAM SOLUTIONS_2024/2025 Monday, September 2, 2024 12:59 PM Page | 2 How many requirements are there in the ANSI/INFOCOMM 4 :2012 Energy management standard - Answer️️ -7 How many design considerations are needed to achieve the ANSI/INFOCOMM 4 :2012 Energy management standard - Answer️️ -21 Wet Systems - Answer️️ -fire protection systems that use water that is always under pressur Dry Systems - Answer️️ -do not have water constantly present in the system and are pressurized by the fire department in the event of a fire. Chemical Systems - Answer️️ -Replace the room air with fire inhibiting gas, such as halon, CO2, or halocarbon agents (that contain chlorine, fluorine, or iodine either individually or in some combination). Inert Gas Systems - Answer️️ -Designed to reduce the ambient oxygen concentration in a protected space to between 10 -14%, a level that is breathable but will not support flaming combustion. These systems use inert gases such as argon and nitrogen, either as mixtures or alone. What to do when firestop is in your path. - Answer️️ -Scrape off as little firest