SABRE REF STUDY GUIDE | Questions and Correct Solutions | Latest Update 2024/2025 | Graded A+

SABRE REF STUDY GUIDE | Questions and Correct Solutions | Latest Update 2024/2025 | Graded A+ Sabre Equipment and Basics Sample Questions S1. What feature should the Referee check about the sabre fencer's lamé? A- Only that the lamé must overlap the knickers by at least 5 centimeters when in the on guard position. B- That the lamé covers the entire valid surface, that there is a groin strap to keep the lamé in place, and that the sleeves are fixed at the wrist by an elastic band. C- Only that the lamé covers the complete torso when arms are raised above head. - Answer -Sabre Sample Questions Answers S1. Answer: (B). One responsibility of the referee is to check that lamés are properly sized and have the inspection mark. Relevant Rule(s): m.34 S2. Fencer X reports to the strip with a conductive over-glove that has no provision, such as elastic, to ensure good contact with the sleeve of the lamé. What should the Referee do?A- Allow Fencer X to fence. B- Confiscate the illegal over-glove; Fencer X receives a YELLOW CARD; require Fencer X to get a legal over-glove. C- Ask Fencer X to change the over-glove. No penalty. - Answer -S2. Answer: (B). If the fencer has an over-glove, the referee must make sure that the position of the over-glove can't be altered during fencing. Relevant Rule(s): m.33.3 S3. The metallic fabric covering the conductive over-glove must