• Wrong document? Swap it for free
  • Written by students who passed
  • Immediately available after payment
  • Read online or as PDF
Sell
Where do you study
Your language
Document preview thumbnail
Preview 3 out of 19 pages
Exam (elaborations)

Millwright Level Final Exam

Document preview thumbnail
Preview 3 out of 19 pages

MILLWRIGHT LEVEL FINAL EXAM

Content preview

MILLWRIGHT LEVEL FINAL EXAM


On a pedestal grinder, the gap between the grinding wheel and work rest should not
exceed: - ANSWER 1/8 inch

The kind of abrasive material used in grinding wheels for general purpose
applications is: - ANSWER aluminum oxide

A blotter is used on a grinding wheel to: - ANSWER protect the flanges from the
abrasize grit, display information about the wheel and compensate for the uneven
surfaces on the wheel

Flanges should at least be: - ANSWER 1/3 the diameter of the wheel

The best wheel to use for cleaning scale and dirt off a workpiece is the: - ANSWER
wire wheel

What is a natural abrasive? - ANSWER made of natural material rather than
synthetic

Under properties of abrasives, to what does the term hardness refer? - ANSWER
ability of a material to scratch or penetrate another material

The ____ is the part of the wheel that holds the grains together - ANSWER bond

Markings for the wheel identification can be found on the _______ - ANSWER
Blotter

What is the recommended speed to run a grinding wheel? - ANSWER Never run it
faster that the max RPM of the grinding wheel

How should you start a grinder? - ANSWER Stand off to the side and wait a full
minute

Is 46 or 60 the coarser grit? - ANSWER 46

What are the 2 most commonly used abrasive materials? - ANSWER Aluminum
oxide and silicone carbide

For what purpose is the diamond dresser used? - ANSWER When a very fine finish
is required

What is the purpose of ring test? - ANSWER to check for cracks

If a grinding wheel makes a ringing sound what does that mean? - ANSWER wheel
is not cracked

,What is the purpose of truing a grinding wheel? - ANSWER Restores the shape of
the wheel and makes the outer surface of the wheel concentric with its bore

An out of balance wheel: - ANSWER vibrates

Belt grinders are useful for: - ANSWER quickly deburring and chamfering a
workpiece

What is the purpose of a GFCI? - ANSWER Senses drop in current and switches
power off

The kind of abrasive material use in grinding wheels for general purpose application
is: - ANSWER aluminum oxide

Is it safe to carry a portable grinder by the power cord? - ANSWER False

Is it safe to use standard sockets with electric impact wrenches - ANSWER False

The larger the power drill, the slower the RPMs and the higher the torque - ANSWER
True

Can you use conventional drill bits with a hammer drill? Why or why not? - ANSWER
Yes of the hammer drill has a switch to turn off hammer action

Most cordless drills have torque control - ANSWER True

Prolonged use of power or air tools can cause carpal tunnel sydrome - ANSWER
True

Is it safe to run an impact wrench with a universal joint and socket attached -
ANSWER No because it may throw off attachments

What conditions would you use a GFCI - ANSWER Wet conditions

What 3 things does a GFCI protect: - ANSWER 1. Overload 2. Overcurrent 3.
Ground fault protection

A GFCI prevents all electrical shocks - ANSWER False

Higher voltage on a battery means: - ANSWER Greater power of tool

What type of power load must be used in the low velocity tool? Why? - ANSWER
Power load with a crimped end must be used cause high power load would get
lodged in the tool

6 colours ranging from lowest strength to highest strength for power load are: -
ANSWER 1. Grey 2. Brown 3. Green 4. Yellow 5. Red 6. Purple

, Power loads should not be carried loosely in pockets or aprons. Why? - ANSWER
Could be set off causing serious injury or death

Fasteners used in explosive actuated tools are: - ANSWER Manufactured from
special steel and tempered

A drive pin is a fastener used to: - ANSWER Permanently attach one material to
another

What is base material? - ANSWER Material which the fastener shank is driven into

To determine the sustainability of a base material, use a fastener as a centre punch
struck by a single average hammer blow. If the fastener is blunted ( meaning it can't
fasten) the material is too: - ANSWER Hard

To determine the sustainability of a base material, use a fastener as a centre punch
struck by a single average hammer blow. If the fastener penetrates easily, do not
fasten because the material is too: - ANSWER Soft

To determine the sustainability of a base material, use a fastener as a centre punch
struck by a single average hammer blow. If the material cracks or shatters, do not
fasten because the material is too: - ANSWER Brittle

A threaded knurled pin is designed for what material - ANSWER Mild steel

To be a qualified operator of an explosive actuated tool you must posses: -
ANSWER training in the use of each tool and familiarity with local safety regulations

OH&S states that operators of explosive actuate tools should always wear: -
ANSWER Eye protection

If a tool is found to be defective, you should: - ANSWER Mark it defective and call a
service representative

According to OH&S, what safety equipment is required when using an explosive
actuate tool in a confined area such as a small room? - ANSWER ear plugs and eye
protection

Who is responsible if an accident occurs as a result of an unattended explosive
actuated tool? - ANSWER The operator

Should an explosive actuated tool be used in explosive or flammable area? -
ANSWER No

How often should an explosive actuated tool be cleaned under normal working
conditions? - ANSWER It should be cleaned daily or when it becomes sluggish

How much oil should be added to the tool parts after cleaning? - ANSWER None

What part requires replacement most often in a low velocity tool? - ANSWER Buffer

Document information

Uploaded on
September 10, 2024
Number of pages
19
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers
$18.49

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
PREPPERFECT
4.7
(3481)
Sold
483
Followers
62
Items
16598
Last sold
13 hours ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions