PROGRESSION: FIELD TECH V -VI
CONVENTIONAL FT 5 TO FT 6 ACTUAL EXAM 100
QUESTIONS AND ANSWERS
Terms in this set (118)
According to Category 5e.
Telecommunications
Industry
Association/Electronic
Industries Alliance - TIA/EIA
standards, which type of
unshielded twisted-pair
(UTP) cabling is
recommended for data-
grade applications?
According to A packet-based network.
Telecommunication
Standardization Sector
(ITU-T , what is a next -
generation network (NGN)?
As part of multicast network Multicast traps.
management, what can
notify Simple Network
Management Protocol
(SNMP) network
management stations
(NMS) of multicast
problems and errors?
,Asynchronous transfer Add an additional header.
mode (ATM) can be
transported over
multiprotocol label
switching (MPLS) networks
and the reverse is also true.
Looking at their individual
attributes, where ATM must
segment and encapsulate
data packets into cells and
then decapsulate and
reassemble, MPLS needs to
only do this.
Asynchronous transfer Virtual path identifier (VPI) and virtual channel identifier
mode (ATM) virtual circuits (VCI).
(VC) switch cells across
networks by using which
two header components?
At the end of the Inbound call capability.
installation process, when
verifying the operation of a
modular jack by connecting
a customer phone or a test
set to the jack, which of the
following should be tested?
, At work, Emily's laptop is 255.255.255.0
assigned the Internet
protocol (IP) address
192.10.10.10.
When Emily takes the
computer home, the laptop
is assigned the IP address
of 192.168.100.25.
Whether at work or at
home, what is the classful
netmask assigned
to her network interface
card?
Because a cable operator Check the RF signal levels on the cable entering the
will support as many lines building.
as technically possible for a
business customer, what
does the installer have to
do prior to connecting the
embedded multimedia
terminal adapter (EMTA)?
Before a business The building owner or management company.
telephone installation is
performed in an office
building, who must
first approve it?
Before starting a final Talk to the same person that he or she spoke to at the
review with a customer at beginning of the installation.
the end of an installation,
what should an installer try
to do?
CONVENTIONAL FT 5 TO FT 6 ACTUAL EXAM 100
QUESTIONS AND ANSWERS
Terms in this set (118)
According to Category 5e.
Telecommunications
Industry
Association/Electronic
Industries Alliance - TIA/EIA
standards, which type of
unshielded twisted-pair
(UTP) cabling is
recommended for data-
grade applications?
According to A packet-based network.
Telecommunication
Standardization Sector
(ITU-T , what is a next -
generation network (NGN)?
As part of multicast network Multicast traps.
management, what can
notify Simple Network
Management Protocol
(SNMP) network
management stations
(NMS) of multicast
problems and errors?
,Asynchronous transfer Add an additional header.
mode (ATM) can be
transported over
multiprotocol label
switching (MPLS) networks
and the reverse is also true.
Looking at their individual
attributes, where ATM must
segment and encapsulate
data packets into cells and
then decapsulate and
reassemble, MPLS needs to
only do this.
Asynchronous transfer Virtual path identifier (VPI) and virtual channel identifier
mode (ATM) virtual circuits (VCI).
(VC) switch cells across
networks by using which
two header components?
At the end of the Inbound call capability.
installation process, when
verifying the operation of a
modular jack by connecting
a customer phone or a test
set to the jack, which of the
following should be tested?
, At work, Emily's laptop is 255.255.255.0
assigned the Internet
protocol (IP) address
192.10.10.10.
When Emily takes the
computer home, the laptop
is assigned the IP address
of 192.168.100.25.
Whether at work or at
home, what is the classful
netmask assigned
to her network interface
card?
Because a cable operator Check the RF signal levels on the cable entering the
will support as many lines building.
as technically possible for a
business customer, what
does the installer have to
do prior to connecting the
embedded multimedia
terminal adapter (EMTA)?
Before a business The building owner or management company.
telephone installation is
performed in an office
building, who must
first approve it?
Before starting a final Talk to the same person that he or she spoke to at the
review with a customer at beginning of the installation.
the end of an installation,
what should an installer try
to do?
