MSSC Maintenance awareness Exam
Questions and Answers () | 100%
Correct Verified Answers Graded A+
.
A burn or pungent odor of oil indicates
CORRECT ANSWER>> excessive temperature
A Chain should be replaced when its length becomes longer than the original
length.
CORRECT ANSWER>> 3 percent
A common sign of a misaligned coupling is .
CORRECT ANSWER>> excessive vibration
A multimeter is a multipurpose devise that can measure
CORRECT ANSWER>> voltage, current, and resistance
A power diagram is used in addition to a ladder diagram to determine .
CORRECT ANSWER>> All of these (How the input functions on the
machine, The sequence of operations, How the output functions on the
machine)
A power tool has the ground prong broken off of the plug on the power cord. What
should be done?
CORRECT ANSWER>> Remove the power tool from service
A shaft coupling may be out of round if dial indicator shows .
CORRECT ANSWER>> any movement
A sight glass in a reservoir usually indicates the of fluid.
CORRECT ANSWER>> level
A tool should be sharpened
CORRECT ANSWER>> When an unacceptable surface finish is present
, A viscos meter is a device used for measuring the viscosity of an oil and is generally
accurate.
CORRECT ANSWER>> 95%-99%
A well designed workstation places tools and equipment where they can be
CORRECT ANSWER>> available with minimum stress
A workstation should be designed to minimize motions that can
CORRECT ANSWER>> cause repetitive/ stress injuries
All documentation of preventive maintenance should be kept
CORRECT ANSWER>> in a designated, safe and secure location
An electrical diagram that arranges wires of a circuit into order rows is called a(n)
.
CORRECT ANSWER>> ladder diagram
An employee come to work on a rainy day and finds water dripping on tools in their
workstation. What should the employee do first?
CORRECT ANSWER>> report the situation to the supervisor
Because dial indicators are fairly delicate, they should during adjustment of
the motor position.
CORRECT ANSWER>> be removed
Before adjusting motor position during a shaft alignment always make sure to remove
the .
CORRECT ANSWER>> dial indicator
Both analog and digital voltmeters measure
CORRECT ANSWER>> Potential difference
Circuit testers determine if electricity is present.
CORRECT ANSWER>> AC
Questions and Answers () | 100%
Correct Verified Answers Graded A+
.
A burn or pungent odor of oil indicates
CORRECT ANSWER>> excessive temperature
A Chain should be replaced when its length becomes longer than the original
length.
CORRECT ANSWER>> 3 percent
A common sign of a misaligned coupling is .
CORRECT ANSWER>> excessive vibration
A multimeter is a multipurpose devise that can measure
CORRECT ANSWER>> voltage, current, and resistance
A power diagram is used in addition to a ladder diagram to determine .
CORRECT ANSWER>> All of these (How the input functions on the
machine, The sequence of operations, How the output functions on the
machine)
A power tool has the ground prong broken off of the plug on the power cord. What
should be done?
CORRECT ANSWER>> Remove the power tool from service
A shaft coupling may be out of round if dial indicator shows .
CORRECT ANSWER>> any movement
A sight glass in a reservoir usually indicates the of fluid.
CORRECT ANSWER>> level
A tool should be sharpened
CORRECT ANSWER>> When an unacceptable surface finish is present
, A viscos meter is a device used for measuring the viscosity of an oil and is generally
accurate.
CORRECT ANSWER>> 95%-99%
A well designed workstation places tools and equipment where they can be
CORRECT ANSWER>> available with minimum stress
A workstation should be designed to minimize motions that can
CORRECT ANSWER>> cause repetitive/ stress injuries
All documentation of preventive maintenance should be kept
CORRECT ANSWER>> in a designated, safe and secure location
An electrical diagram that arranges wires of a circuit into order rows is called a(n)
.
CORRECT ANSWER>> ladder diagram
An employee come to work on a rainy day and finds water dripping on tools in their
workstation. What should the employee do first?
CORRECT ANSWER>> report the situation to the supervisor
Because dial indicators are fairly delicate, they should during adjustment of
the motor position.
CORRECT ANSWER>> be removed
Before adjusting motor position during a shaft alignment always make sure to remove
the .
CORRECT ANSWER>> dial indicator
Both analog and digital voltmeters measure
CORRECT ANSWER>> Potential difference
Circuit testers determine if electricity is present.
CORRECT ANSWER>> AC
