Dante Level 1-3 Exam Questions with Correct
Answers.
Dante audio streams over WiFi networks [are _______________________]. - Correct
Answer not supported
The bit depth of an audio system dictates - Correct Answer The amplitude resolution of
each sample
Does Dante support MIDI - Correct Answer No. Dante only transports audio data and
does not interfere with MIDI.
Is there any advantage to using automatic IP addressing on a Dante network - Correct
Answer Yes. Automatic addressing ensures that devices create a working LAN.
How are device names used in Dante - Correct Answer Subscriptions are made from
name to name
Dante works best with [______________] switches - Correct Answer gigabit
On a Dante network, latency is - Correct Answer deterministic, set per device
As sample rate is increased on a device, what other property is usually changed -
Correct Answer Channel count is reduced
Where do Dante settings reside? - Correct Answer On individual Dante devices
In the Dante Controller Routing tab, a green check mark indicates - Correct Answer
Subscription successful
Which of the following are diagnostic features of Dante Controller? (check all that apply)
- Correct Answer 1. Latency monitoring
2. Clock monitoring
How does Dante interact with Energy Efficient Ethernet (EEE) switches? - Correct
Answer EEE switches are not recommended for use with Dante
When should fiber be used for an Ethernet connection? - Correct Answer When runs
over 100 meters are required.
The easiest way to get IP addresses for a functional stand-alone Dante network is for all
devices and computers to - Correct Answer Use the "obtain an IP Address
Automatically" setting
, If a network is only used for Dante and has only one network switch, then - Correct
Answer The network does not require a managed switch
Does Dante require special network cabling? - Correct Answer Regular CAT5E or CAT6
Ethernet cable is recommended
How are devices added to a Dante network - Correct Answer Devices are automatically
discovered and displayed in Dante Controller
Dante uses [_________________________] switches. - Correct Answer standard
How are devices restored to a Dante network after power cycle - Correct Answer
Devices and connections are automatically restored
What does the Dante Clock Master do - Correct Answer Provides synchronization for all
Dante devices on the network
Does a Dante network require special configuration for clocking - Correct Answer No. A
Clock Master is always automatically elected by Dante
A[______________] network topology is a best practice for Dante. - Correct Answer
star
What is latency - Correct Answer Latency is the audio signal delay in any audio system.
Dante transmitters are sources. Dante receivers are [______________________]. -
Correct Answer destinations
The names of devices and channels in Dante are - Correct Answer User-definable and
remembered by devices.
The default Dante latency of 1 millisecond is - Correct Answer very low and suitable for
the majority of applications
What are the steps to delete a subscription in Dante Controller? (drag to put steps in the
correct order) - Correct Answer 1. Open both transmitter and receiver to expose
channels
2. Click green checkmark at intersection of channels you wish to unsubscribe
3. Wait for green checkmark to disappear
Audio sent over a Dante network is - Correct Answer uncompressed, bit-perfect
Dante is an example of [_____________________________]. - Correct Answer an
audio over IP (AoIP) solution
Answers.
Dante audio streams over WiFi networks [are _______________________]. - Correct
Answer not supported
The bit depth of an audio system dictates - Correct Answer The amplitude resolution of
each sample
Does Dante support MIDI - Correct Answer No. Dante only transports audio data and
does not interfere with MIDI.
Is there any advantage to using automatic IP addressing on a Dante network - Correct
Answer Yes. Automatic addressing ensures that devices create a working LAN.
How are device names used in Dante - Correct Answer Subscriptions are made from
name to name
Dante works best with [______________] switches - Correct Answer gigabit
On a Dante network, latency is - Correct Answer deterministic, set per device
As sample rate is increased on a device, what other property is usually changed -
Correct Answer Channel count is reduced
Where do Dante settings reside? - Correct Answer On individual Dante devices
In the Dante Controller Routing tab, a green check mark indicates - Correct Answer
Subscription successful
Which of the following are diagnostic features of Dante Controller? (check all that apply)
- Correct Answer 1. Latency monitoring
2. Clock monitoring
How does Dante interact with Energy Efficient Ethernet (EEE) switches? - Correct
Answer EEE switches are not recommended for use with Dante
When should fiber be used for an Ethernet connection? - Correct Answer When runs
over 100 meters are required.
The easiest way to get IP addresses for a functional stand-alone Dante network is for all
devices and computers to - Correct Answer Use the "obtain an IP Address
Automatically" setting
, If a network is only used for Dante and has only one network switch, then - Correct
Answer The network does not require a managed switch
Does Dante require special network cabling? - Correct Answer Regular CAT5E or CAT6
Ethernet cable is recommended
How are devices added to a Dante network - Correct Answer Devices are automatically
discovered and displayed in Dante Controller
Dante uses [_________________________] switches. - Correct Answer standard
How are devices restored to a Dante network after power cycle - Correct Answer
Devices and connections are automatically restored
What does the Dante Clock Master do - Correct Answer Provides synchronization for all
Dante devices on the network
Does a Dante network require special configuration for clocking - Correct Answer No. A
Clock Master is always automatically elected by Dante
A[______________] network topology is a best practice for Dante. - Correct Answer
star
What is latency - Correct Answer Latency is the audio signal delay in any audio system.
Dante transmitters are sources. Dante receivers are [______________________]. -
Correct Answer destinations
The names of devices and channels in Dante are - Correct Answer User-definable and
remembered by devices.
The default Dante latency of 1 millisecond is - Correct Answer very low and suitable for
the majority of applications
What are the steps to delete a subscription in Dante Controller? (drag to put steps in the
correct order) - Correct Answer 1. Open both transmitter and receiver to expose
channels
2. Click green checkmark at intersection of channels you wish to unsubscribe
3. Wait for green checkmark to disappear
Audio sent over a Dante network is - Correct Answer uncompressed, bit-perfect
Dante is an example of [_____________________________]. - Correct Answer an
audio over IP (AoIP) solution
