Maine State Inspection Class A
Minimum Brake Pedal Reserve - 1/three
Transmission necessities - Functioning Drive, Reverse, and Park
Required Functional Malfunction indicator lights
(Class A best) - ABS, TPMS, Airbag,BRAKE
Parking Brake Requirements - Hold vehicle, Not linked to carrier brake gadget, no oil or grease
on linings, ought to disengage
Minimum Brake pad thickness - 2/32"
Maximum Brake pad crack depth - half way thru
Reject car if the brake pad surface is included with this - grease or oil
Reject automobile if brake discs or drums have these - significant cracks in friction floor,
immoderate rust, oil or grease infection
Reject car if the internal diameter of the drum is: - large than the discard thickness stamped at
the drum
Reject automobile if any brake disc thickness is: - Thinner than the discard thickness stamped
on the disc
Hydraulic gadget additives that must be free of leaks and structural rust - Master cylinder,
Reservoir, brake strains/hoses, ABS hydraulic unit, Calipers, Wheel Cylinders
Power Assist Braking System Check - Engine off- push pedal till it turns into firm. Start engine
and make sure brake pedal drops slightly.
How to test vacuum assist test valve - After checking Power help operation, close engine off.
Press brake pedal several times making sure that 2 or three applications are assisted earlier
than pedal turns into stiff again.
Exterior frame element necessities - Vehicle ought to have strong attached hood, doors,
fenders, and many others.
Reject automobile (Exterior) - Rust holes in passenger location or shape. Inoperable door
latches, Trunk vicinity unsealed, Hood latch fails to perform.
, Exterior door manage elimination necessities - Must be capable of manually open from interior
of vehicle
Reject vehicle (Exterior) - Fenders do not cover tire tread, the front or rear fenders removed,
bumper changed with much less strong components, missing bumpers.
Minimum Brake Fluid level in reservoir - half complete
Reject Vehicle (Fuel System) - Missing gasoline fill cap, Evaporator hose
disconnected/damaged
Reject Vehicle (Fuel System) - Fuel line rusted to close to failure
Seat Belts required on this 12 months and newer - 1966
Seat Mounting Requirements - Mounted to floor, adjustable seats must stay in role
Retractable Seat Belts required on this 12 months and newer - 1980
Battery requirements - Must have functioning maintain down gadget, now not located in
passenger compartment without proper cowl
Vehicles required to have splash guards - 6000 lbs GVWR and up
License Plate Requirements - Must be current, horizontally mounted on the way to be without
problems examine, and be displayed the front and rear.
Exhaust Components Required - The exhaust gadget consists of the exhaust manifold, the
piping leading from the flange on the exhaust manifold to and inclusive of the mufflers, the tail
piping, and the catalytic converter.
Exhaust gadget must be free of: - Leaks, holes, unsupported/clamped additives, loose baffles.
Exhaust gadget need to exit wherein? - Completely to aspect or rear of the enclosed passenger
portion of the vehicles body.
What yr Catalytic Converters are required - 1982 and more recent
Maximum size of un-repaired bullseye windshield fractures allowed in Critical Vision Area - 1
Inch
Maximum length of Windshield cracks allowed anywhere at the windshield - 6 inches
Minimum Brake Pedal Reserve - 1/three
Transmission necessities - Functioning Drive, Reverse, and Park
Required Functional Malfunction indicator lights
(Class A best) - ABS, TPMS, Airbag,BRAKE
Parking Brake Requirements - Hold vehicle, Not linked to carrier brake gadget, no oil or grease
on linings, ought to disengage
Minimum Brake pad thickness - 2/32"
Maximum Brake pad crack depth - half way thru
Reject car if the brake pad surface is included with this - grease or oil
Reject automobile if brake discs or drums have these - significant cracks in friction floor,
immoderate rust, oil or grease infection
Reject car if the internal diameter of the drum is: - large than the discard thickness stamped at
the drum
Reject automobile if any brake disc thickness is: - Thinner than the discard thickness stamped
on the disc
Hydraulic gadget additives that must be free of leaks and structural rust - Master cylinder,
Reservoir, brake strains/hoses, ABS hydraulic unit, Calipers, Wheel Cylinders
Power Assist Braking System Check - Engine off- push pedal till it turns into firm. Start engine
and make sure brake pedal drops slightly.
How to test vacuum assist test valve - After checking Power help operation, close engine off.
Press brake pedal several times making sure that 2 or three applications are assisted earlier
than pedal turns into stiff again.
Exterior frame element necessities - Vehicle ought to have strong attached hood, doors,
fenders, and many others.
Reject automobile (Exterior) - Rust holes in passenger location or shape. Inoperable door
latches, Trunk vicinity unsealed, Hood latch fails to perform.
, Exterior door manage elimination necessities - Must be capable of manually open from interior
of vehicle
Reject vehicle (Exterior) - Fenders do not cover tire tread, the front or rear fenders removed,
bumper changed with much less strong components, missing bumpers.
Minimum Brake Fluid level in reservoir - half complete
Reject Vehicle (Fuel System) - Missing gasoline fill cap, Evaporator hose
disconnected/damaged
Reject Vehicle (Fuel System) - Fuel line rusted to close to failure
Seat Belts required on this 12 months and newer - 1966
Seat Mounting Requirements - Mounted to floor, adjustable seats must stay in role
Retractable Seat Belts required on this 12 months and newer - 1980
Battery requirements - Must have functioning maintain down gadget, now not located in
passenger compartment without proper cowl
Vehicles required to have splash guards - 6000 lbs GVWR and up
License Plate Requirements - Must be current, horizontally mounted on the way to be without
problems examine, and be displayed the front and rear.
Exhaust Components Required - The exhaust gadget consists of the exhaust manifold, the
piping leading from the flange on the exhaust manifold to and inclusive of the mufflers, the tail
piping, and the catalytic converter.
Exhaust gadget must be free of: - Leaks, holes, unsupported/clamped additives, loose baffles.
Exhaust gadget need to exit wherein? - Completely to aspect or rear of the enclosed passenger
portion of the vehicles body.
What yr Catalytic Converters are required - 1982 and more recent
Maximum size of un-repaired bullseye windshield fractures allowed in Critical Vision Area - 1
Inch
Maximum length of Windshield cracks allowed anywhere at the windshield - 6 inches
