SPēD SAPPC EXAM FOR PHYSEC EXAM
SPēD SAPPC EXAM FOR PHYSEC WITH GUARANTEED ACCURATE ANSWERS |
VERIFIED
B. It must be in an area designated as a Restricted Area - ACCURATE
ANSWERS✔✔ When designing a new multi-story government Special
Access Program Facility (SAPF), the architect provided identical
drawings for two three-story buildings to the security officer. One
drawing is for a building on the installation to be occupied only by
contracting Company X. The other is for the command headquarters
building on the installation.The design reveals floor-to-ceiling windows
on the second floor for the main conference rooms and front office staff.
The drawings indicate a parking lot adjacent to the building separated by
a four-foot-wide, handicap-accessible sidewalk. The architect placed
emergency exits and stairwells at each end of the building with door
hardware on the exterior to facilitate access/egress. The floor plans show
interior office and conference room doors with GSA-approved locks and
connectivity to the building access control badge system. The front door
drawings indicate a large safety glass key lock entry door with the unit
logo and designation etched in the glass. The single entry door provides
,access into the building lobby where visit control staff will greet people
and in-process visitors. The plans identify lock boxes to be placed inside
the lobby for visitors and employees to store their electronic digital
devices and other prohibited items. The architect designed an open lobby
leading to interior hallways, an elevator and access to the stairways. He
placed the access control system central processing unit (CPU) behind
the visit control desk. Typically, the CPU is located in the dispatch
center.
As a result, which of the following is true regarding the placement of the
CPU?
A. It may remain in the building lobby because the doors serve as
adequate access control.
B. It must be in an area designated as a Restricted Area.
C. It must be in an area designated as a Sensitive Comp
True - ACCURATE ANSWERS✔✔ True or False. Hinge pins that are
located on the exterior side of emergency exit doors in the SAPF must
be spot welded or have set screws installed to prevent removal of the
door.
C. Bollard or berm - ACCURATE ANSWERS✔✔ Which of the
following man-made barriers could be an appropriate measure to impede
vehicle passage between the parking lot and the building?
, A. Bollard or chain link fence
B. Berm or moat
C. Bollard or berm
D. Berm or chain link fence
The five steps in the DoD risk management model - ACCURATE
ANSWERS✔✔ 1. Assess Assets
2. Assess Threats
3. Assess Vulnerabilities
4. Assess Risks
5. Determine Countermeasures
Three core components of the risk assessment process - ACCURATE
ANSWERS✔✔ 1. Asset criticality
2. Threat assessment
3. Vulnerability assessment
Physical security survey - ACCURATE ANSWERS✔✔ A formal,
recorded assessment of an installation's overall security program
SPēD SAPPC EXAM FOR PHYSEC WITH GUARANTEED ACCURATE ANSWERS |
VERIFIED
B. It must be in an area designated as a Restricted Area - ACCURATE
ANSWERS✔✔ When designing a new multi-story government Special
Access Program Facility (SAPF), the architect provided identical
drawings for two three-story buildings to the security officer. One
drawing is for a building on the installation to be occupied only by
contracting Company X. The other is for the command headquarters
building on the installation.The design reveals floor-to-ceiling windows
on the second floor for the main conference rooms and front office staff.
The drawings indicate a parking lot adjacent to the building separated by
a four-foot-wide, handicap-accessible sidewalk. The architect placed
emergency exits and stairwells at each end of the building with door
hardware on the exterior to facilitate access/egress. The floor plans show
interior office and conference room doors with GSA-approved locks and
connectivity to the building access control badge system. The front door
drawings indicate a large safety glass key lock entry door with the unit
logo and designation etched in the glass. The single entry door provides
,access into the building lobby where visit control staff will greet people
and in-process visitors. The plans identify lock boxes to be placed inside
the lobby for visitors and employees to store their electronic digital
devices and other prohibited items. The architect designed an open lobby
leading to interior hallways, an elevator and access to the stairways. He
placed the access control system central processing unit (CPU) behind
the visit control desk. Typically, the CPU is located in the dispatch
center.
As a result, which of the following is true regarding the placement of the
CPU?
A. It may remain in the building lobby because the doors serve as
adequate access control.
B. It must be in an area designated as a Restricted Area.
C. It must be in an area designated as a Sensitive Comp
True - ACCURATE ANSWERS✔✔ True or False. Hinge pins that are
located on the exterior side of emergency exit doors in the SAPF must
be spot welded or have set screws installed to prevent removal of the
door.
C. Bollard or berm - ACCURATE ANSWERS✔✔ Which of the
following man-made barriers could be an appropriate measure to impede
vehicle passage between the parking lot and the building?
, A. Bollard or chain link fence
B. Berm or moat
C. Bollard or berm
D. Berm or chain link fence
The five steps in the DoD risk management model - ACCURATE
ANSWERS✔✔ 1. Assess Assets
2. Assess Threats
3. Assess Vulnerabilities
4. Assess Risks
5. Determine Countermeasures
Three core components of the risk assessment process - ACCURATE
ANSWERS✔✔ 1. Asset criticality
2. Threat assessment
3. Vulnerability assessment
Physical security survey - ACCURATE ANSWERS✔✔ A formal,
recorded assessment of an installation's overall security program
