OREGON TATTOO LICENSE EXAM 2024-2025 /ACTUAL COMPLETE
QUESTIONS AND CORRECT ANSWERS (VERIFIED ANSWERS )
ALREADY GRADED A+.
can a mobile facility be in motion while performing services -
ANSWER-never
when the armature bar is flat on the front coil what is the smallest gap
above the rear coil? - ANSWER-.10
what does a smaller gap above the rear coil cause? - ANSWER-more
power
what should armature bars be made of? - ANSWER-plain steel
how does the machine run if too much of the coil core is showing? -
ANSWER-hot
what type of edges should your contact screw have? – ANSWER-
rounded and smooth
where in on the front spring should the contact screw be hitting? -
ANSWER-front or end of spring
what length of spring would run faster - ANSWER-short spring with a
high angle
, what type of metal should the contact screw be made of to have the
highest conductivity - ANSWER-brass
how does the armature bar hit the front coil core - ANSWER-flat full
contact
what do you want the frame on your tattoo machine to be? -
ANSWER-nonconductive
what happens when your machine is conductive or electrified -
ANSWER-it stays on with the armature bar sticking to the coils
what diameter should your binding post be - ANSWER-5/16ths
what happens if u use a steel contact screw? - ANSWER-can cause
sparks
when setting up your machine why would you snug down the eye of
the needle bar - ANSWER-prevent weak jumpy lines
why is a one piece contact screw the best choice - ANSWER-adding
things can cause vibration
what are two advantages of a brass contact screw - ANSWER-100%
conductive and it keeps it shape for longer than other metals
QUESTIONS AND CORRECT ANSWERS (VERIFIED ANSWERS )
ALREADY GRADED A+.
can a mobile facility be in motion while performing services -
ANSWER-never
when the armature bar is flat on the front coil what is the smallest gap
above the rear coil? - ANSWER-.10
what does a smaller gap above the rear coil cause? - ANSWER-more
power
what should armature bars be made of? - ANSWER-plain steel
how does the machine run if too much of the coil core is showing? -
ANSWER-hot
what type of edges should your contact screw have? – ANSWER-
rounded and smooth
where in on the front spring should the contact screw be hitting? -
ANSWER-front or end of spring
what length of spring would run faster - ANSWER-short spring with a
high angle
, what type of metal should the contact screw be made of to have the
highest conductivity - ANSWER-brass
how does the armature bar hit the front coil core - ANSWER-flat full
contact
what do you want the frame on your tattoo machine to be? -
ANSWER-nonconductive
what happens when your machine is conductive or electrified -
ANSWER-it stays on with the armature bar sticking to the coils
what diameter should your binding post be - ANSWER-5/16ths
what happens if u use a steel contact screw? - ANSWER-can cause
sparks
when setting up your machine why would you snug down the eye of
the needle bar - ANSWER-prevent weak jumpy lines
why is a one piece contact screw the best choice - ANSWER-adding
things can cause vibration
what are two advantages of a brass contact screw - ANSWER-100%
conductive and it keeps it shape for longer than other metals
