Vivint Smart Home Pro Final UPDATED
Exam Questions and CORRECT Answers
12-24v - Correct Answer- What is the input voltage range of the Doorbell Cam?
16.5 VAC - Correct Answer- What is the output voltage of the transformer used to power the
SkyControl panel?
true - Correct Answer- True or False: When programming a sensor into the sky panel you can
type in the serial number or "learn" it in by triggering the device
2 - Correct Answer- When programming a DW21, which loop number is used?
1
2
3
beans and wire caps - Correct Answer- Which of the following materials can you use to group
multiple ground terminals in a takeover module:
Solder
String
Wire Caps
Duct Tape
Beans
True - Correct Answer- T or F: When installing the firefighter, it is required to test the
customer's existing smoke detectors
3/4" - Correct Answer- When installing a DW21, what size bit should you use to drill the hole
for the sensor?
1/2"
, 3/8"
3/4"
1"
True - Correct Answer- T or F: When installing the TAKE-345, you must ensure that the
transformer is supplying power to the power supply before the battery.
True - Correct Answer- T or F: You are required to test signals from all secondary keypads
and key fobs even though they are not detection devices
False - Correct Answer- T or F: When running power to the TAKE-345 polarity does not
apply
- Correct Answer- What is the correct height at which to install the PIR2?
7 ft
At least 5 ft
At least 7 ft
At 7.5 ft
How would you program a CO3 if mounted on a hallway wall?
Loop 1 Zone 8
Loop 1 Zone 14
Loop 3 Zone 4
Loop 1 Zone 4 - Correct Answer-
When installing a DW21 into a metal door frame, with a wooden door, what should you be
sure to use?
Metal Drill bit
A DW11 should be used on all metal door frames
3/4" insulated magnet
Eye goggles - Correct Answer-
Exam Questions and CORRECT Answers
12-24v - Correct Answer- What is the input voltage range of the Doorbell Cam?
16.5 VAC - Correct Answer- What is the output voltage of the transformer used to power the
SkyControl panel?
true - Correct Answer- True or False: When programming a sensor into the sky panel you can
type in the serial number or "learn" it in by triggering the device
2 - Correct Answer- When programming a DW21, which loop number is used?
1
2
3
beans and wire caps - Correct Answer- Which of the following materials can you use to group
multiple ground terminals in a takeover module:
Solder
String
Wire Caps
Duct Tape
Beans
True - Correct Answer- T or F: When installing the firefighter, it is required to test the
customer's existing smoke detectors
3/4" - Correct Answer- When installing a DW21, what size bit should you use to drill the hole
for the sensor?
1/2"
, 3/8"
3/4"
1"
True - Correct Answer- T or F: When installing the TAKE-345, you must ensure that the
transformer is supplying power to the power supply before the battery.
True - Correct Answer- T or F: You are required to test signals from all secondary keypads
and key fobs even though they are not detection devices
False - Correct Answer- T or F: When running power to the TAKE-345 polarity does not
apply
- Correct Answer- What is the correct height at which to install the PIR2?
7 ft
At least 5 ft
At least 7 ft
At 7.5 ft
How would you program a CO3 if mounted on a hallway wall?
Loop 1 Zone 8
Loop 1 Zone 14
Loop 3 Zone 4
Loop 1 Zone 4 - Correct Answer-
When installing a DW21 into a metal door frame, with a wooden door, what should you be
sure to use?
Metal Drill bit
A DW11 should be used on all metal door frames
3/4" insulated magnet
Eye goggles - Correct Answer-
