OECP
what type of fire extinguisher is required on a crane - ANS10BC
what should am operator do in the event of a power line contact - ANSremain in the machine
unless fire or emergency
what is the minimum distance from a 200kv power line - ANS20ft
where must electrocution warnings be displayed - ANS1 in the cab, 2 on the outside
a boom angle indicator does not show what? - ANSboom deflection
hand signals must use what method? - ANSstandard method
An operator must obey a stop signal from who? - ANSanyone
when using radio, telephone or electronic signals, receiving must be what? - ANShands free
what must voice signals include? - ANSfunction and direction, distance and speed, function and
stop
what is the minimum number of wraps on a drum - ANS2
most LMI's will not indicate - ANSLevelness
if signals are interrupted the operator must do what? - ANSstop safety
all directions must be given in the operator's what? - ANSperspective
what are the ANSI/ASME audible signals - ANS1 stop
2 forward
3 reverse
when can an LMI be used to weigh a load? - ANSup to 75% of capacity at the working radius
what is the correct procedure if an LMI fails? - ANSuse the load chart and the boom angle
unless not allowed by the manufacturer
what functions are disabled by a kick-out system? - ANShoist up, boom down, telescope out
power lines are always presumed what? - ANSenergized
, travel distance on 2 way levers shall not exceed what? - ANS14 inches from neutral
forces shall not be greater than what on a foot pedal? - ANS50 pounds
a crane traveling at 15 mph must be able to stop in what distance? - ANS32 feet
what does PCSA stand for? - ANSpower crane and shovel association
what is the safety factor for synthetic slings? - ANS5 to 1
what is PS - ANSplow steel
an annual inspection must be performed by a - ANSqualified person
what is the construction rigging standard? - ANS1926.251
what is the general industry rigging standard - ANS1910.184
what is the general industry crane standard - ANS1910.180
what is the construction crane standard - ANS1926.1400 also known as subpart cc
what is the ANSI/ASME standard for construction crane - ANSB30.5
what does ANSI stand for - ANSAmerican national standards institute
what does ASME stand for? - ANSAmerican society of mechanical engineers
what does CFR stand for - ANScode of federal regulations
what part of the load charts does not show boom deflection - ANSrange diagram
A deduction should be made for an extension even when lifting from it?
true or false - ANSfalse
what do asterisks signify on a load chart - ANSstructural capacity
the maximum list allowed for a land crane on a barge is? - ANS5 degrees
land cranes on a barge fall under what ANSI standard - ANSB30.8
dynamic movement of a barge can make lifts be what? - ANSUnpredictable
what type of fire extinguisher is required on a crane - ANS10BC
what should am operator do in the event of a power line contact - ANSremain in the machine
unless fire or emergency
what is the minimum distance from a 200kv power line - ANS20ft
where must electrocution warnings be displayed - ANS1 in the cab, 2 on the outside
a boom angle indicator does not show what? - ANSboom deflection
hand signals must use what method? - ANSstandard method
An operator must obey a stop signal from who? - ANSanyone
when using radio, telephone or electronic signals, receiving must be what? - ANShands free
what must voice signals include? - ANSfunction and direction, distance and speed, function and
stop
what is the minimum number of wraps on a drum - ANS2
most LMI's will not indicate - ANSLevelness
if signals are interrupted the operator must do what? - ANSstop safety
all directions must be given in the operator's what? - ANSperspective
what are the ANSI/ASME audible signals - ANS1 stop
2 forward
3 reverse
when can an LMI be used to weigh a load? - ANSup to 75% of capacity at the working radius
what is the correct procedure if an LMI fails? - ANSuse the load chart and the boom angle
unless not allowed by the manufacturer
what functions are disabled by a kick-out system? - ANShoist up, boom down, telescope out
power lines are always presumed what? - ANSenergized
, travel distance on 2 way levers shall not exceed what? - ANS14 inches from neutral
forces shall not be greater than what on a foot pedal? - ANS50 pounds
a crane traveling at 15 mph must be able to stop in what distance? - ANS32 feet
what does PCSA stand for? - ANSpower crane and shovel association
what is the safety factor for synthetic slings? - ANS5 to 1
what is PS - ANSplow steel
an annual inspection must be performed by a - ANSqualified person
what is the construction rigging standard? - ANS1926.251
what is the general industry rigging standard - ANS1910.184
what is the general industry crane standard - ANS1910.180
what is the construction crane standard - ANS1926.1400 also known as subpart cc
what is the ANSI/ASME standard for construction crane - ANSB30.5
what does ANSI stand for - ANSAmerican national standards institute
what does ASME stand for? - ANSAmerican society of mechanical engineers
what does CFR stand for - ANScode of federal regulations
what part of the load charts does not show boom deflection - ANSrange diagram
A deduction should be made for an extension even when lifting from it?
true or false - ANSfalse
what do asterisks signify on a load chart - ANSstructural capacity
the maximum list allowed for a land crane on a barge is? - ANS5 degrees
land cranes on a barge fall under what ANSI standard - ANSB30.8
dynamic movement of a barge can make lifts be what? - ANSUnpredictable
