Michigan Builders License Exam Questions With 100%Verified Answers A+GRADED

Michigan Builders License Exam Questions With 100%Verified Answers A+GRADED Created to serve as a complete, comprehensive code regulating the construction of single-family, two-family and buildings consisting of three or more townhouse units. - correct answer...IRC (International Residential Code) Administrative - correct answer...First 2 chapters of code book are True - correct answer...Plans or supporting documents are almost always required by the controlling authority prior to issuing a permit. T or F Yes - correct answer...Does the building official have the authority to render interpretations of the code? 8 foot fence. - correct answer...None of the following require a permit, EXCEPT: sidewalks and driveways tiling an 8 foot fence playground equipment False - correct answer...Tables and illustrations are always supported by information found in the written code and footnotes. T or F Live load. - correct answer...The amount of evenly distributed weight imposed by inhabitants, goods and removable objects on a floor or roof system is referred to as True. - correct answer...If a code requirement is in the book, it is both acceptable and enforceable by the code official. T or F Figures. - correct answer...Illustrations are typically referred to as Determine that buildings are built to the minimum enforceable standard. - correct answer...Generally speaking, the building official's job is to True. - correct answer...It is required that all manufacturer instructions be at the jobsite at the time of inspection. T or F Kitchen. - correct answer...All of the following are not considered habitable spaces EXCEPT: bathrooms kitchens storage spaces closets 3. - correct answer...Bathrooms must be provided with an aggregate glazing area no less than _____ square feet, half of which must be openable. 44 inches. - correct answer...The maximum height of an egress window above the floor is 5.7 sq ft. - correct answer...A basement bedroom must have an egress window with a clear opening of at least ______ square feet. 3. - correct answer...At least one side-hinged exit door must be in each dwelling unit, and must be _____ feet wide. 30 inches. - correct answer...A porch more than _____ inches above grade must be provided with 36" guards. 200. - correct answer...Wall and ceiling finishes shall have a flame-spread classification of no more than ______ . 7 days. - correct answer...According to code, concrete must reach at least 70% of it's ability within ____________days. 40%. - correct answer...A stud used for a non-bearing partitions may not be notched more than ____% of the stud width. Additions, alterations, renovation and repairs. - correct answer...The Michigan Uniform Energy code applies to new buildings as well as U-factor. - correct answer...___________ is a measure of how well the window or door assembly conducts heat. The lower the number, the better insulation the assembly will provide. 50%. - correct answer...Energy losses from recessed lighting fixtures can often reach ___% of the total thermal loss of a ceiling. R-3. - correct answer...Michigan requires a minimum thermal resistance of ____________for mechanical system piping. True. - correct answer...Oversized HVAC equipment has a higher initial cost, a higher operating cost, provides less comfort, and shorter life expectancy. T or F Prescriptive Path. - correct answer..._______ is the compliance route that applies Table 402.1.1 to building envelope components, and is considered the most simple. Area weighted averages. - correct answer...___________ can be used to satisfy U-factor and SHGC requirements. IC (Insulation Contact) - correct answer...Recessed lights must be _____ rated. True. - correct answer...Up to 15 square feet of glazing per dwelling unit is exempted from U-value requirements. T or F Registered design professional. - correct answer...The 2009 IECC requires a permanent certificate posted on the electrical distribution panel. The certificate shall be completed by the builder or State energy code requirements. - correct answer...One hurdle contractors face when bidding for an energy efficient project is choosing materials that fit the design, and also meet False. - correct answer...Historically significant buildings are not exempt from code changes. T or F R-value Settled thickness Manufacturer name - correct answer...Insulation products (blown and sprayed) must be documented with: March 2011. - correct answer...The new Michigan codes took effect in 10. - correct answer...Below grade walls are insulated from the top of the basement wall down to _____ below grade, or the basement floor, whichever is less. Area weighted average. - correct answer...The _______ is the combined Solar Heat Gain Coefficient of all the glazed fenestration products in the building. Thermal insulation R-values Design criteria Equipment systems - correct answer...Plans and specifications must be detailed in regards to: 2009. - correct answer...In Michigan, the residential energy code is based on the _____ IECC, with certain amendments. Air leakage. - correct answer...___________ is the rate of air infiltration in the presence of a specific pressure differential. Windows Attic access hatches Recessed lights - correct answer...Air leakage is the random movement of air into and out of ________ through cracks and holes. Table 402.1.1 2009 IECC - correct answer...R-values for insulation and fenestration requirements by component can be found in International Energy Conservation Code - correct answer...IECC U-factor and UA alternatives. - correct answer...The _____________ compliance method allows for more innovative construction techniques like SIPs or Advanced Framing. 500 sq feet - correct answer...R-30 is permitted in vaulted ceilings, but is limited to True. - correct answer...Floor insulation must be installed to maintain permanent and continuous contact with the underside of the subfloor decking. T or F 5, 6 and 7. - correct answer...Michigan falls into climate zones False. - correct answer...It is permissible for supply ducts to be run through the framing cavities of a residential building. T or F IC rated (Insulation Contact) - correct answer...__________ means an electrical fixture has been tested and listed as suitable for installation in a cavity where the fixture may come in contact with insulation. 3%. - correct answer...According to the Dept. of Energy, improved energy codes could reduce CO2 emissions by 300 sq ft. - correct answer...Attic insulation markers must be installed every _____ square feet. True. - correct answer...Buildings that are exempted from the new regulations are those with very low energy use or ones that are neither heated or cooled. T or F Yes. - correct answer...A contractor needs to remove a non-load bearing wall, does he need to pull a permit? No. - correct answer...A concrete contractor has been hired by an owner to install a driveway and sidewalks. The lot is flat and the concrete is being place on undisturbed earth with a prepared base. Does the contractor need to pull a permit? Yes. - correct answer...A permit has been issued for a building project and there is a code infraction in the building plans that has been overlooked by the building official. Can the building official require a correction to a project that they previously overlooked? Health department. - correct answer...Who issues a well and septic permit? 200 sq. feet. IRC R105 - correct answer...Permits are not required for one story detached accessory structures not exceeding: The next business day. - correct answer...If work requiring a permit is provided in an emergency situation, the permit application must be submitted within: True. - correct answer...If an inspection official is refused entry to a building project, the official will have recourse to the remedies provided by law which include securing a warrant from the court and returning with an officer of the law. No. IRC R104.8 - correct answer...Can a building official be held liable for any damage occurring to persons or property as a result of their actions or inaction? Yes. - correct answer...An owner needs a foundation wall repaired, it has seriously buckled due to excessive lateral loading from soil pressure. Does the contractor need to pull a permit? 6 ft. IRC R105.2 - correct answer...Although contractors should check for restrictive covenants and local zoning requirements, a permit isn't required from the building official for installing a fence not over _______ tall. 180 days. - correct answer...If a permit is applied for but not yet approved and the applicant is not persueing approval after______ days the application will be considered abandoned. Yes. - correct answer...Can a building official revoke a Certificate of Occupancy? True. - correct answer...When a project requiring a permit has commenced prior to the issuance of a permit, the building official is authorized to charge an additional fee. T or F 450 - correct answer...Foam plastic is used as insulation. The flame spread index cannot exceed 75 and the smoke development index cannot exceed