COMP 444 Embedded/Robotic Programming final exam study ahead
solution Athabasca University
, COMP 444 Embedded/Robotic Programming final exam study ahead solution Athabasca University
A feature that does not define a robot is __________. - --computer controlled
An advantage that robots have over manual labor for performing tasks is __________. - --improving
product quality and improving quality of life (A and C)
The five basic components of a robot are: - --Manipulator, End Effector, Controller, Drives, and Teach
Pendant
Which one of the following is not one of the eight robot safety rules? - --None of the above
Operators who work in a robot work area must have access to a device called a(n)
__________. - --emergency stop
The joints of the robot manipulator that allow the arm to bend like a person's arm are
called the __________. - --axes
To move the robot manually is called __________. - --Jogging
A __________ is a handheld device connected to the robot by an electrical cable. - --teach pendant
The __________ allows the robot controller to continuously monitor the position of the
servo motors. - --encoder
__________ is an automatic procedure that causes the robot's axes to each move to a
position where it actuates its home sensor. - --Homing
solution Athabasca University
, COMP 444 Embedded/Robotic Programming final exam study ahead solution Athabasca University
A feature that does not define a robot is __________. - --computer controlled
An advantage that robots have over manual labor for performing tasks is __________. - --improving
product quality and improving quality of life (A and C)
The five basic components of a robot are: - --Manipulator, End Effector, Controller, Drives, and Teach
Pendant
Which one of the following is not one of the eight robot safety rules? - --None of the above
Operators who work in a robot work area must have access to a device called a(n)
__________. - --emergency stop
The joints of the robot manipulator that allow the arm to bend like a person's arm are
called the __________. - --axes
To move the robot manually is called __________. - --Jogging
A __________ is a handheld device connected to the robot by an electrical cable. - --teach pendant
The __________ allows the robot controller to continuously monitor the position of the
servo motors. - --encoder
__________ is an automatic procedure that causes the robot's axes to each move to a
position where it actuates its home sensor. - --Homing