Basic Orientation Plus Questions
and Correct Answers
what is the most frequently cited OSHA violation ?
✓✓~~ Fall Protection
what are the key elements that are essential to recognizing hazards and reducing
and/or eliminating workplace hazrds
✓✓~~ 1.) management commitment and employee involvement
2.) hazard prevention and control
3.) worksite analysis
4.) safety and health training
you are encouraged to ask your __________ for information whenever you have a
problem or are in doubt about what to do on a job.
✓✓~~ Supervisor
it is your responsibility to follow all safety regulations, inform your employer of any
unsafe condition; report all injuries (no matter how minor they seem); and wear the
proper personal protective equipment. T/F
✓✓~~ True
,what is the OSHA standard that addresses the requirements for preventing and
lessening the results of a bad release of toxic, reactive, flammable, or highly
explosive hazardous chemicals from a process ?
✓✓~~ Process Safety Management Standard
The Process Hazard Analysis (PHA) is one of the most important parts of the PSM
program. PHAs are used to identify and evaluate major processes and ensure they
are:
✓✓~~ 1.) Identified
2.) Evaluated
3.) Controlled
In the PSM Standard, OSHA states employees must be trained if they work with
highly hazardous chemicals . T/F
✓✓~~ True
facilities are not permitted to control your entrance and exit in covered process
areas. T/F
✓✓~~ False
If you are replacing a piece of equipment, the new one should be the same as the
one being removed. If not, you should find out whether the change was on purpose.
This is called ?
, ✓✓~~ Management of Change
which of the following should be your first concern when entering the work cite ?
✓✓~~ Saftey
Under the Stop Work Authority, you have the right and obligation to stop work activity
if you have reason to believe your own safety or a co-workers safety is in jeopardy or
if the work plan is not clearly established or understood. T/F
✓✓~~ True
To operate a plant-owned vehicle or mobile equipment while at a facility, you must
be __________ to do so by the equipment owner.
✓✓~~ Qualified and Authorized
Work permits are usually required before the start of any job. name some of the work
permits you may encounter.
✓✓~~ 1.) Safe Work Permits
2.) Confine Space Entry Permits
3.) Hot Work Permits
4.) Line Entry / Line Breaking Permits
5.) Lockout/Tagout permits
used only where an immediate life threatening hazard exists.
and Correct Answers
what is the most frequently cited OSHA violation ?
✓✓~~ Fall Protection
what are the key elements that are essential to recognizing hazards and reducing
and/or eliminating workplace hazrds
✓✓~~ 1.) management commitment and employee involvement
2.) hazard prevention and control
3.) worksite analysis
4.) safety and health training
you are encouraged to ask your __________ for information whenever you have a
problem or are in doubt about what to do on a job.
✓✓~~ Supervisor
it is your responsibility to follow all safety regulations, inform your employer of any
unsafe condition; report all injuries (no matter how minor they seem); and wear the
proper personal protective equipment. T/F
✓✓~~ True
,what is the OSHA standard that addresses the requirements for preventing and
lessening the results of a bad release of toxic, reactive, flammable, or highly
explosive hazardous chemicals from a process ?
✓✓~~ Process Safety Management Standard
The Process Hazard Analysis (PHA) is one of the most important parts of the PSM
program. PHAs are used to identify and evaluate major processes and ensure they
are:
✓✓~~ 1.) Identified
2.) Evaluated
3.) Controlled
In the PSM Standard, OSHA states employees must be trained if they work with
highly hazardous chemicals . T/F
✓✓~~ True
facilities are not permitted to control your entrance and exit in covered process
areas. T/F
✓✓~~ False
If you are replacing a piece of equipment, the new one should be the same as the
one being removed. If not, you should find out whether the change was on purpose.
This is called ?
, ✓✓~~ Management of Change
which of the following should be your first concern when entering the work cite ?
✓✓~~ Saftey
Under the Stop Work Authority, you have the right and obligation to stop work activity
if you have reason to believe your own safety or a co-workers safety is in jeopardy or
if the work plan is not clearly established or understood. T/F
✓✓~~ True
To operate a plant-owned vehicle or mobile equipment while at a facility, you must
be __________ to do so by the equipment owner.
✓✓~~ Qualified and Authorized
Work permits are usually required before the start of any job. name some of the work
permits you may encounter.
✓✓~~ 1.) Safe Work Permits
2.) Confine Space Entry Permits
3.) Hot Work Permits
4.) Line Entry / Line Breaking Permits
5.) Lockout/Tagout permits
used only where an immediate life threatening hazard exists.
