Dell client Questions And
Answers
NIC Activity LED is off and Link indicator is green. This indicates NIC is
connected to a valid network at its maximum port speed but data isn't being
sent/received
✓~ True
When the side cover of Precision Tower 7920 is not assembled, the system will
still power on.
✓~ False
The BIOS can be accessed in a Dell System using which of the following keys:
✓~ F2
What steps must be taken if there is a fan-related error message displayed at
the Start up, but the system boots to the OS?
, ✓~ NOT Check for Dust or debris on the Fans, clean them
Check the System Event logs for any thermal messages or fan failures?
Select the statements which are right concerning RAID 5
✓~ not It stripes the data among the drives with a parity bit
Check all that applies when troubleshooting PSU issue in a Dell Precision Rack
✓~ If a PSU indicates Blinking amber, this indicates Power supply is
operational NOT
AC PSU indicator blinks green five times at a rate of 4 Hz and turns off to
indicate PSU mismatch ?
Which screwdriver is recommended for removing PHM (Processor Heat Sink
module) used on a Precision Rack 7920?
✓~ Torx #T30
Under what scenarios can we clear the NVRAM by moving the PSWD jumper to
the RTCRST pins?
Answers
NIC Activity LED is off and Link indicator is green. This indicates NIC is
connected to a valid network at its maximum port speed but data isn't being
sent/received
✓~ True
When the side cover of Precision Tower 7920 is not assembled, the system will
still power on.
✓~ False
The BIOS can be accessed in a Dell System using which of the following keys:
✓~ F2
What steps must be taken if there is a fan-related error message displayed at
the Start up, but the system boots to the OS?
, ✓~ NOT Check for Dust or debris on the Fans, clean them
Check the System Event logs for any thermal messages or fan failures?
Select the statements which are right concerning RAID 5
✓~ not It stripes the data among the drives with a parity bit
Check all that applies when troubleshooting PSU issue in a Dell Precision Rack
✓~ If a PSU indicates Blinking amber, this indicates Power supply is
operational NOT
AC PSU indicator blinks green five times at a rate of 4 Hz and turns off to
indicate PSU mismatch ?
Which screwdriver is recommended for removing PHM (Processor Heat Sink
module) used on a Precision Rack 7920?
✓~ Torx #T30
Under what scenarios can we clear the NVRAM by moving the PSWD jumper to
the RTCRST pins?
