Texas Mold Assessment Consultant Exam Questions With Complete SolutionsA+GRADED(100% PASS!!!)

Texas Mold Assessment Consultant Exam Questions With Complete SolutionsA+GRADED(100% PASS!!!) The Texas mold assessment and remediation rules states that notice signs must be legible from - correct answer...10 feet after completing any training course required by the Texas mold assessment and remediation rules, how long do you have to take and pass the state examination - correct answer...6 months the assigned protection factor (PF) for an N-95 respirator is - correct answer...there is no PF rating for an N-95 respirator According to the EPA"mold remediation in schools and commercial buildings" document, the EPA recommends the following for cleanup of books and papers that were damaged with clear water within 24-48 hours - correct answer...discard all books and papers, photocopy and discard originals, and freeze or freeze-dry originals when sampling with a spore trap you are usually trying to determine - correct answer...identification of viable mild spores which of the following sampling devices would you use to determine respirable and non-respirable viable airborne mold spores? - correct answer...air-o-cell cassette according to the Texas mold assessment and remediation rules, if a contractor is working under the exceptions and exemptions subsection and identifies additional mold that affects a total surface area of more than 25 contiguous square feet they shall - correct answer...Immediately cease all remediation work and implement emergency containment if necessary according to the Texas mold assessment and remediation rules, a containment area is defined as - correct answer...an area that has been enclosed to control the release of mold or mold-containing vapors into the surrounding area a musty odor indoors usually indicates - correct answer...microbial growth skin and eye protection during the remediation process is used to protect workers from - correct answer...mold toxins and spores, dust mites, and cleaning products according to the Texas mold assessment and remediation rules the required clearance level of mold spores is - correct answer...N/A which sampling method would you use to determine both viable and non- viable mold concentrations in the air - correct answer...air-o-cell-cassette according to the EPA's "mold remediation in schools and commercial buildings" document, the EPA recommends the following for cleanup for non-porous hard surface areas - correct answer...cleaned with detergent solution what is the normal air flow rate an air-o-cell cassette - correct answer...15 liters/minute according to the. EPA's "mold remediation in schools and commercial buildings", it is recommended that water damaged cellulose ceiling tiles should. be - correct answer...discarded what is the normal air flow rater used for an Andersen sampler - correct answer...28.3 liters/minute according to the Texas mold assessment and remediation rules, who can write a mold management plan? - correct answer...a licensed mold assessment consultant according to the Texas mold assessment and remediation rules, a mold assessment consultant may perform an assessment to - correct answer...collect data for writing a mold assessment report health effects from inhalation of mold spores could be - correct answer...Hypersensitivity pneumonitis according to the Texas mold assessment and remediation rules, mold is defines as - correct answer...spores, hyphae, mycotoxins, and living or dead fungi according to the Texas mold assessment and remediation rules, the purpose of a mold assessment is to - correct answer...determine the sources, locations and extent of mold growth in a building / determine the condition(s) that caused the mold growth / and enable the assessment consultant to prepare a mold remediation protocol according to the Texas mold assessment and remediation rules, a licensed mold assessment company or consultant shall maintain records until - correct answer...the company or consultant issues a mold assessment report, management plan, or remediation protocol to a client, if the company or consultant performs. only the initial assessment for the project / the company or consultant issues the final. status report to the client, if a. final status report is issued / and the company or consultant provides the. signed. certificate of mold remediation to a mold remediation contractor or company, if a certificate of mold remediation is provided according to the Texas mold assessment and remediation rules, a post remediation assessment shall determine if - correct answer...the work area is free of all visible mold and wood rot / all work has been completed in compliance with the remediation protocol and work plan and meets clearance criteria specified in the protocol according to the Texas mold assessment and remediation rules, notice signs for mold remediation projects must say - correct answer...NOTICE: mold remediation project in progress according to the Texas mold assessment and remediation rules, containment is not required for a contaminated area of less than - correct answer...25 continguous square feet according to the Texas mold assessment and remediation rules, the stop date is defined as - correct answer...the date after the date on which final clearance is achieved according to the Texas mold assessment and remediation rules, the start date is defined as - correct answer...the date on which the actual remediation begins according to table. 2 of the EPA's "Mold remediation in schools and commercial buildings", it is recommended that a carpeted area of 50 square feet that has mold contamination from clean water should be - correct answer...wet vacuumed, HEPA vacuumed or discarded well-sealed plastic bags according to table. 2 of the EPA's "Mold remediation in schools and commercial buildings, the containment recommended for a contaminated area of less than 10 ft.² is - correct answer...none according to the Texas mold assessment and remediation rules, notice signs for mold remediation projects must be - correct answer...8 inches by 10 inches in size according to table one of the EPA's mold remediation in schools of commercial buildings, if clean water damage has occurred within 24 hours to 48 hours, it is recommended that cellulose insulation be - correct answer...discarded and replaced according to table one of the EPA's mold remediation in schools of commercial buildings, if clean water damage has occurred within 24 to 48 hours is recommended that wallboard (drywall and gypsum) be - correct answer...dried in place if no swelling has occurred and seems are intact according to the Texas mold assessment and remediation rules, the minimum PPE for any mold remediation should be - correct answer...N-95 respirator