CDC 2W051A EXAM LATEST UPDATED
2024-2025
Who is responsible for appointing qualified individuals to become certified
munitions inspectors? - ANSWER Flight Chief
What is the minimum skill level requirement to be a certified munitions inspector?
- ANSWER Five-level
Who is responsible for determining and assigning the appropriate condition codes
to munitions assets? - ANSWER Munitions inspectors
Which type of lot number is assigned to a combination of 5.56 mm ball and tracer
packed together for field use? - ANSWER functional
A defect that is likely to result in a hazardous condition is classified as: - ANSWER
critical
A munitions item or component with its explosives material completely removed is
considered - ANSWER empty
When you encounter a ballooned barrier bag, which document do you follow for
specific item instructions? - ANSWER Item's technical order (TO).
Which term is used to conspicuously mark previously opened hermetically sealed
containers? - ANSWER NOT HERMETICALLY SEALED
The step that is not part of the general inspection procedures is to verify -
ANSWER items have at least 2 days of shelf life remaining.
Which inspection provides a high degree of confidence that the munitions have not
been adversely affected by the environment, storage conditions, age, or use? -
ANSWER Periodic inspection
,Which inspection ensures that an item is suitable for its intended use before it is
signed over to a user? - ANSWER Pre-issue (PII)
What must you do if more than one condition code applies to the item you are
inspecting? - ANSWER Use the most restrictive
Which response best describes condition code B? - ANSWER Serviceable with
qualification
DD Form 1574/1574-1 (yellow tag) is used to identify munitions in which
condition? - ANSWER serviceable
Which unserviceable item tag is used on munitions that are not economical to
repair? - ANSWER DD Form 1577
You must update historical records in which database before you can dispose of the
AFTO Form 102? - ANSWER Combat Ammunition System (CAS)
Which combat ammunition system (CAS) program displays condition and status of
stockpile and custody assets? - ANSWER Asset balance inquiry
Who may authorize local disposal of unserviceable and non-repairable inert
munitions valued at less than $500 per item? - ANSWER Munitions accountable
systems officer (MASO)
Which combat ammunition system report is included with munitions shipments
IAW TO 11A-1-10? - ANSWER Lot history inspection report
Which report is used to identify a shipping-related problem caused by the shipping
activity? - ANSWER Supply Discrepancy Report (SDR)
Which of the following is an example of a packaging discrepancy? - ANSWER
Container markings incorrect
When using the transportation discrepancy report (TDR), you are identifying a
problem against the - ANSWER Carrier who delivered the assets
Who submits a transportation discrepancy report (TDR)? - ANSWER
, Transportation Management Office
Which form is used to report product quality deficiencies (PQDR)? - ANSWER SF
368
You are required to use TO 11A-1-53 for which inspections of inert and empty
munitions items? - ANSWER Pre-issue and shipping inspections
Which word is impressed and stenciled on items that have had their explosive
material removed and not replaced? - ANSWER empty
Four holes, no smaller than 1/4 inch, are required to be drilled 90 degrees apart for
munitions items - ANSWER stock listed as explosive and have had their explosive
filler removed.
Which publication provides certifying guidance to inspectors of munitions residue
and empty containers? - ANSWER TO 11A-1-60
The material remaining after a munitions item has had its explosive filler removed
by either normal functioning or demilitarization is called - ANSWER munitions
residue
Where do you place the certificate of clearance after you inspect empty munitions
containers? - ANSWER Outside of the container
What must you do to the old munitions identification before you certify a container
as empty? - ANSWER Obliterate the old munitions identification markings
Which procedure should be performed first during an initial munitions inspection? -
ANSWER Visually inspect seals
When documentation for an incoming shipment is missing or incomplete you must
immediately notify the - ANSWER munitions flight chief
Any vehicle found to be in a hazardous condition is considered - ANSWER to
suspect
The governing directive for hazardous materials movement by military air is -
ANSWER AFMAN 24-204
2024-2025
Who is responsible for appointing qualified individuals to become certified
munitions inspectors? - ANSWER Flight Chief
What is the minimum skill level requirement to be a certified munitions inspector?
- ANSWER Five-level
Who is responsible for determining and assigning the appropriate condition codes
to munitions assets? - ANSWER Munitions inspectors
Which type of lot number is assigned to a combination of 5.56 mm ball and tracer
packed together for field use? - ANSWER functional
A defect that is likely to result in a hazardous condition is classified as: - ANSWER
critical
A munitions item or component with its explosives material completely removed is
considered - ANSWER empty
When you encounter a ballooned barrier bag, which document do you follow for
specific item instructions? - ANSWER Item's technical order (TO).
Which term is used to conspicuously mark previously opened hermetically sealed
containers? - ANSWER NOT HERMETICALLY SEALED
The step that is not part of the general inspection procedures is to verify -
ANSWER items have at least 2 days of shelf life remaining.
Which inspection provides a high degree of confidence that the munitions have not
been adversely affected by the environment, storage conditions, age, or use? -
ANSWER Periodic inspection
,Which inspection ensures that an item is suitable for its intended use before it is
signed over to a user? - ANSWER Pre-issue (PII)
What must you do if more than one condition code applies to the item you are
inspecting? - ANSWER Use the most restrictive
Which response best describes condition code B? - ANSWER Serviceable with
qualification
DD Form 1574/1574-1 (yellow tag) is used to identify munitions in which
condition? - ANSWER serviceable
Which unserviceable item tag is used on munitions that are not economical to
repair? - ANSWER DD Form 1577
You must update historical records in which database before you can dispose of the
AFTO Form 102? - ANSWER Combat Ammunition System (CAS)
Which combat ammunition system (CAS) program displays condition and status of
stockpile and custody assets? - ANSWER Asset balance inquiry
Who may authorize local disposal of unserviceable and non-repairable inert
munitions valued at less than $500 per item? - ANSWER Munitions accountable
systems officer (MASO)
Which combat ammunition system report is included with munitions shipments
IAW TO 11A-1-10? - ANSWER Lot history inspection report
Which report is used to identify a shipping-related problem caused by the shipping
activity? - ANSWER Supply Discrepancy Report (SDR)
Which of the following is an example of a packaging discrepancy? - ANSWER
Container markings incorrect
When using the transportation discrepancy report (TDR), you are identifying a
problem against the - ANSWER Carrier who delivered the assets
Who submits a transportation discrepancy report (TDR)? - ANSWER
, Transportation Management Office
Which form is used to report product quality deficiencies (PQDR)? - ANSWER SF
368
You are required to use TO 11A-1-53 for which inspections of inert and empty
munitions items? - ANSWER Pre-issue and shipping inspections
Which word is impressed and stenciled on items that have had their explosive
material removed and not replaced? - ANSWER empty
Four holes, no smaller than 1/4 inch, are required to be drilled 90 degrees apart for
munitions items - ANSWER stock listed as explosive and have had their explosive
filler removed.
Which publication provides certifying guidance to inspectors of munitions residue
and empty containers? - ANSWER TO 11A-1-60
The material remaining after a munitions item has had its explosive filler removed
by either normal functioning or demilitarization is called - ANSWER munitions
residue
Where do you place the certificate of clearance after you inspect empty munitions
containers? - ANSWER Outside of the container
What must you do to the old munitions identification before you certify a container
as empty? - ANSWER Obliterate the old munitions identification markings
Which procedure should be performed first during an initial munitions inspection? -
ANSWER Visually inspect seals
When documentation for an incoming shipment is missing or incomplete you must
immediately notify the - ANSWER munitions flight chief
Any vehicle found to be in a hazardous condition is considered - ANSWER to
suspect
The governing directive for hazardous materials movement by military air is -
ANSWER AFMAN 24-204
