CA CREMATORY MANAGER’S TEST QUESTIONS AND VERIFIED SOLUTIONS 2024/2025 GRADED A+.

CA CREMATORY MANAGER’S TEST QUESTIONS AND VERIFIED SOLUTIONS 2024/2025 GRADED A+. 2 / 7 1. What does the timer do?: It shuts off either the primary burner, or afterburner ata preset time so that the operator doesn't have to shut them off manually. 2. Name the 8 systems that have some kind of control, either by the operatoror by an automated programmer.: 1) Electric Activated Door Control 2) Blower 3) Combustion Burner 4) Afterburner 5) Timer 6) Temperature Controller/Indicator 7) Chart Reorder 8) Opacity Monitor 3. What is the next step after the 7 start-up steps?: Use a cardboard roller toinsert case into primary chamber. 4. If repositioning is necessary, what body part is likely to need to be moved, and to where?: The trunk part of the torso or bone mass; to directly over the flameof the burner. 5. How cool should the primary chamber be before attempting removal ofcremated remains?: Blow 400F 6. What are the two steps involved in processing cremated remains?: 1) Re-moval of foreign objects 2) Reduction of particle size by grinding, crushing, pulverizing, etc to consistencyappropriate for disposition. 7. Name 7 types of foreign objects whose removal is consistent with process-ing.: 1) Pacemakers 2) Prosthesis 3) Dental Gold 4) Jewelry 5) Mementos 6) Screw, nails, or staples 7) Casket hardware not previously removed. 8. 6 step procedure for processing cremated remains: 1) Check processor forcleanliness 2) Remove foreign material from remains 3 / 7 3) Retrieve ID disc 4) Place remains in processor and process 5) Brush all residue into catch tray 6) Take tray and tag to packaging table 9. Minimum thickness of plastic bag inside urn.: 2 mm 10. Where in urn should ID disc be placed?: On plastic tie that closes bag inside. 11. What should be done if cremated remains do not fill urn completely?: Fillthe balance with clean shredded paper. 12. If urn lid is not completely secure, what should be sured to secure it?: Ny-lon filament tape. 13. List eight layers of material for packaged cremated remains,from inside tooutside.: 1) Cremated remains 2) Plastic bag 3) Identification disc