Chief Examiner’s Report
Level 3 Engineering - June 2024
Introduction
Many candidates submitted comprehensive portfolios, containing their own work,
while a minority still continue to include rough notes, research material and a
large amount of documentation, most of which is not relevant to the marking
grids, so should be retained at the centre.
The majority of centres demonstrate an ongoing commitment to the
development of their employer and industry links, providing some excellent
examples of applied learning, in the workplace and relevant to modern
engineering industries.
The standard of work varied across the units with the majority of candidates
constructing substantial portfolios. Where centres construct robust assessment
instruments which meet the requirements of the unit specifications, candidates
often perform very well. This is contrasted with candidates who produce
considerable volumes of evidence that is not clearly directed and does not meet
the specification requirements.
The assessment instruments are also starting to reflect employer links, making
use of actual, or modified, scenarios around which to develop their applied
assessments. Where assessment is based purely on theory or ‘what ifs’,
research, internet searches, etc, marks from mark band 1 are all that can be
attained due to the lack of real depth of learning.
A small number of centres continue to use the samples which were initially
provided by the awarding body, without making attempts to tailor them to their
own experiences and resources, or demonstrate any internal quality control by
making them more fit for their own purpose.
Administration
Most portfolios were submitted in a timely fashion, some being a few weeks
before the deadline, but most of them arriving for moderation on, or close to,
the deadline.
Centre administration, inclusion of the correct sample, including the highest and
lowest non-zero score, a signed EDI printout showing the scores submitted to
Edexcel, authentication signatures of candidates and assessors on completed
Candidate Record Sheets (CRS), etc was generally good, with a small number of
centres needing reminders for an omission or two.
Centres are reminded that each unit specification has a section entitled
‘guidance for allocating marks’, which should be referred to when designing,
completing and assessing summative assessments. The “what you need to
learn” section is also helpful in determining the content and evidence
requirements of assessments. These elements articulate with the marking grid,
which is the key component that assessors and moderators refer to when
allocating marks for each learning outcome (LO) and mark band (MB).
2
Some centres now include a complements slip or piece of paper with the name
and contact email and direct phone number for the examinations officer, which
saves a few days of return of post when anything is missing and has to be
requested by a moderator.
Centres are also reminded to ensure their centre name and number are currently
recorded on the Edexcel Gateway to allow contact and recording of results
against the correct centre. Centres merge and change their name quite
regularly, and keeping the records at Edexcel up to date can reduce the risk of
delay for reporting the results and return of work.
The CRS is designed and provided by Edexcel to be completed and placed at the
front of each portfolio. It is in Word format to allow the addition of more rows to
allow the correct number of learning outcomes (LOs) to be entered, but some
centres are using it to provide feedback to the candidates or expanding it to
include the assessment criteria, etc. All this is fine, for centre use, but please
place another one in front of these, in the original format, containing the
information required for moderation.
A recording error which occurs quite regularly is the combination of LOs, such as
LO1.1 and LO1.2, as appropriate, into a single LO1, which does not provide
adequate information for the moderator to work with. Some centres have
designed their own mark record sheets for marking/feedback. Whilst this is often
useful for candidates the CRS provided by Edexcel should still be completed and
included at the front of each portfolio or assignment. This is used to guide the
moderator in selecting the initial sample of work to moderate.
Assessment
The presentation of portfolios improves year on year and the majority of centres
are now presenting work as if it is going for moderation and not for a
presentation or open evening. Folders, plastic sleeves, fancy coloured front
sheets, etc, are not required, and in fact, they impede the processes of
moderation and awarding, as well as bulking up the packaging, causing storage
problems in many moderators’ homes. A4 paper, in portrait mode, each portfolio
being held together using a single treasury tag through the top left hand corner
is all that is required. Staples should never be included. Page numbers should be
considered essential.
For most units, a dozen to twenty pages of A4 proves adequate to achieve
scores into the 50s, but despite this, some portfolios still contain copious
amounts of unnecessary teaching material, research printouts, website and
employer printouts, etc. The only material that can be awarded any marks is the
work of the candidates, and that is generally all that should be assessed and
sent for moderation.
Content preview
Moderators’ Report/ Principal Moderator Feedback Summer 2012 Principal Learning Engineering Level 3 Controlled Assessments Edexcel and BTEC Qualifications Edexcel and BTEC qualifications come from Pe arson, the world’s leading learning company. We provide a wide range of qualifications in cluding academic, vocational, occupational and specific programmes for employers. For further information visit our qualifications websites at www.edexcel.com or www.btec.co.uk for our BTEC qualifications. Alternatively, you can get in touch with us using the details on our contact us page at www.edexcel.com/contactus . If you have any subject specific questions about this specification that require the help of a subject specialist, you can speak directly to the subject team at Pearson. Their contact details can be found on this link: www.edexcel.com/teachingservices
. You can also use our online Ask the Expert service at www.edexcel.com/ask
. You will need an Edexcel username and password to access this service. Pearson: helping people progress, everywhere Our aim is to help everyone progress in their lives through education. We believe in every kind of learning, for all kinds of people, wherever they are in the world. We’ve been involved in education for over 150 years, an d by working across 70 countries, in 100 languages, we have built an international reputation for our commitment to high standards and raising achievement through innovation in education. Find out more about how we can help you and your students at: www.pearson.com/uk Summer 2012 Publications Code DP032088 All the material in this publication is copyright © Pearson Education Ltd 2012 Contents 1. C h i e f E x a m i n e r ’ s R e p o r t 1 2. EG302 – Applications of Computer Aided Designing 4 3. EG303 – Selection and Application of Engineering Materials 6 4. EG304 – Instrumentation and Control Engineering 8 5. EG305 – Maintaining Engineering Plant, Equipment and Systems 10 6. EG306 – Investigating Modern Manufacturing Techniques Used in Engineering 13 7. EG307 – Innovative Design and Enterprise 15 8. EG309 – Principles and Application of Engineering Science 17 9. Grade Boundaries 2 0