Don't give up now! Trust the process.
Your time: 1 min
Correct 0
PROGRESSION
0%
CONSTRUCTION
Incorrect 100
COORDINATOR I
– II NEWEST 2024 ACTUAL EXAM COMPLETE 100
QUESTIONS
Next steps AND CORRECT DETAILED ANSWERS
100 missed terms
Practice terms in Learn Take a new test
Practice your missed terms Try another test to boost
more until you get them your confidence.
right.
Your answers
1 of 100
Term
Anomalies, such as echoes and blind spots, can hide cable faults or
cause a technician to misinterpret the signature of a time domain
reflectometer (TDR) waveform. What causes an echo on a waveform
TDR?
Give this one a try later!
, The extra distance that the TDR
pulse travels after initially
The weight of the cable.
reflecting off the end of the
cable span.
The frequency of the tdr pulse. The color of the cable.
Don't know?
2 of 100
Term
When splicing equipment into underground hardline coaxial cable, if
the construction crew forgets to identify the direction of the cable,
what can be done to find which cable attaches to the input and output
side of the equipment?
Give this one a try later!
Cut the cables and test for continuity
Use a metal detector to locate the
to determine the input and output
cables underground.
sides.
Attach a cable locator to each
Dig up the entire length of the cable
cable to identify the route that
to visually trace it.
each buried cable follows.
, Don't know?
3 of 100
Term
Why would a technician be asked to measure the signal levels on the
highest and lowest downstream channels from a specific location when
performing a cost payback analysis?
Give this one a try later!
To determine the cable's To optimize the signal strength for
manufacturing date and quality. nearby devices.
To help the design group
determine where to add
To identify potential interference
distribution taps, or to tap into
sources in the area.
the network for a network
extension.
Don't know?
, 4 of 100
Term
Monitoring the status of optical nodes
Give this one a try later!
Involves the use of a node
Relates to analyzing the speed of transponder that continuously
internet connections. monitors a number of critical
functions.
Means checking the temperature of Refers to tracking the performance of
optical fibers. fiber optic cables.
Don't know?
5 of 100
Term
What may be required to remove a very large rock from the ground
during trenching?
Give this one a try later!
Shovel. Backhoe.
Your time: 1 min
Correct 0
PROGRESSION
0%
CONSTRUCTION
Incorrect 100
COORDINATOR I
– II NEWEST 2024 ACTUAL EXAM COMPLETE 100
QUESTIONS
Next steps AND CORRECT DETAILED ANSWERS
100 missed terms
Practice terms in Learn Take a new test
Practice your missed terms Try another test to boost
more until you get them your confidence.
right.
Your answers
1 of 100
Term
Anomalies, such as echoes and blind spots, can hide cable faults or
cause a technician to misinterpret the signature of a time domain
reflectometer (TDR) waveform. What causes an echo on a waveform
TDR?
Give this one a try later!
, The extra distance that the TDR
pulse travels after initially
The weight of the cable.
reflecting off the end of the
cable span.
The frequency of the tdr pulse. The color of the cable.
Don't know?
2 of 100
Term
When splicing equipment into underground hardline coaxial cable, if
the construction crew forgets to identify the direction of the cable,
what can be done to find which cable attaches to the input and output
side of the equipment?
Give this one a try later!
Cut the cables and test for continuity
Use a metal detector to locate the
to determine the input and output
cables underground.
sides.
Attach a cable locator to each
Dig up the entire length of the cable
cable to identify the route that
to visually trace it.
each buried cable follows.
, Don't know?
3 of 100
Term
Why would a technician be asked to measure the signal levels on the
highest and lowest downstream channels from a specific location when
performing a cost payback analysis?
Give this one a try later!
To determine the cable's To optimize the signal strength for
manufacturing date and quality. nearby devices.
To help the design group
determine where to add
To identify potential interference
distribution taps, or to tap into
sources in the area.
the network for a network
extension.
Don't know?
, 4 of 100
Term
Monitoring the status of optical nodes
Give this one a try later!
Involves the use of a node
Relates to analyzing the speed of transponder that continuously
internet connections. monitors a number of critical
functions.
Means checking the temperature of Refers to tracking the performance of
optical fibers. fiber optic cables.
Don't know?
5 of 100
Term
What may be required to remove a very large rock from the ground
during trenching?
Give this one a try later!
Shovel. Backhoe.
