Exam (elaborations) SAWBLADE
A __________ is used for re-sawing on a band saw. - ANSpivot block A dado head cannot cut: - ANSMortises Changing router bits must only take place when the ____________. - ANSrouter is unplugged from the power outlet Describe where the saw guides are located on a band saw: - ANSBoth sides and behind the blade, above and below the table Hardwood should typically be dried to what moisture content before working with it? - ANS6-8% if one needed a rabbet on a board and had a straight bit in the router, which of the following statements would be correct? - ANSA straight fence with a cut-out for the bit is needed Jointing against the grain of a board will most likely result in ________. - ANSchipped grains Plain or Flat sawn woods expand the greatest: - ANStangent to the grain - width Random Orbit sanders tend to leave _________. - ANScircular scratches on the wood Ripping narrow stock on the table saw requires: - ANSa splitter or riving knife, guard, fence, and push stick The __________ is located behind the blade and prevents the blade from deflecting when the stock is pushed into the blade. - ANSthrust bearing The best general grade of hardwoods would be: - ANSFAS
Document information
- Uploaded on
- July 25, 2024
- Number of pages
- 3
- Written in
- 2023/2024
- Type
- Exam (elaborations)
- Contains
- Questions & answers
