Fanuc Section 1 - Robot Operations Study Guide Test.

Fanuc Section 1 - Robot Operations Study Guide Test. people - CORRECT ANSWER When prioritizing the safety of your robotic system, the # 1 consideration should always be A) robot(s); B) workpiece; C) tooling; D) people; E) external devices servo motors - CORRECT ANSWER The controller contains the computer that operates the robot. Which of the following is NOT housed within the controller? A) memory; B) control circuitry; C) operator controls; D) servo motors helpful when determining the direction a robot will move when jogging in WORLD - CORRECT ANSWER The 'right-hand rule' in a cartesian coordinate system A) clearly defines a 2-dim space based on the x and y axis system B) helpful when determining the direction a robot will move when jogging in WORLD C) is a useful tool while jogging in the JOINT jog mode D) is a selectable option which must be installed during a cold start at the left of the LCD screen display - CORRECT ANSWER Status indicator lights indicate the current status of the robot to an operator. These lights are located A) at the left of the LCD screen display B) at the base of the robot C) in the center of the teach pendants LCD screen display D) on the standard operator panel (SOP) allows the operator to jog each joint individually, or a combination of joints by pressing more than one jog key simultaneously - CORRECT ANSWER Jogging the robot in the JOINT jog mode A) moves the robot in a linear motion where precision is desirable B) moves the robot based on a cartesian (xyz) coordinate system C) allows the operator to jog each joint individually, or a combination of joints by pressing more than one jog key simultaneously D) prevents override speed from exceeding 15% LOCAL position - CORRECT ANSWER To cycle start a program from the standard operator panel the REMOTE/LOCAL keyswitch is placed into the A) ON position B) LOCAL position C) REMOTE position D) position it was in when step testing the program