Module 106 Intro to Basic Rigging
Review Questions
Identification tags for slings must include - correct answer-d. manufacturer's name or
trademark
The type of wire rope that is susceptible to heat damage at relatively low temperature is the -
correct answer-a. fiber core
Synthetic slings must be inspected - correct answer-c. before every use
An alloy steel chain sling must be removed from service if there is evidence that - correct
answer-b. replacement links have been used to repair the chain
A piece of rigging hardware used to couple the end of a wire rope to eye fittings, hooks, or
other connections is a(n) - correct answer-b. hitch
A lifting clamp is most likely to be used to move loads such as - correct answer-a. steel
plates
Chain hoists are able to lift heavy loads by utilizing a - correct answer-d. gear system
Before attempting to lift a load with a chain hoist, make sure the - correct answer-b. load is
properly balanced
A hitch configuration that allows slings to be connected to the same load without using a
spreader beam is a - correct answer-c. bridle hitch
To make the Emergency Sto signal that is used by riggers, extend both arms - correct
answer-a. horizontally with palms down and quickly move both arms back and forth
Review Questions
Identification tags for slings must include - correct answer-d. manufacturer's name or
trademark
The type of wire rope that is susceptible to heat damage at relatively low temperature is the -
correct answer-a. fiber core
Synthetic slings must be inspected - correct answer-c. before every use
An alloy steel chain sling must be removed from service if there is evidence that - correct
answer-b. replacement links have been used to repair the chain
A piece of rigging hardware used to couple the end of a wire rope to eye fittings, hooks, or
other connections is a(n) - correct answer-b. hitch
A lifting clamp is most likely to be used to move loads such as - correct answer-a. steel
plates
Chain hoists are able to lift heavy loads by utilizing a - correct answer-d. gear system
Before attempting to lift a load with a chain hoist, make sure the - correct answer-b. load is
properly balanced
A hitch configuration that allows slings to be connected to the same load without using a
spreader beam is a - correct answer-c. bridle hitch
To make the Emergency Sto signal that is used by riggers, extend both arms - correct
answer-a. horizontally with palms down and quickly move both arms back and forth
