Ag Mechanics CDE Study Guide 100% Accurate!

The practice of uniting metal parts by heating or compression is called - ANSWERwelding The metal to be joined or welded together is classified as the - ANSWERbase metal The discharge of electricity through an air space is called the - ANSWERarc Flux coated metal welding rods are referred to as - ANSWERelectrodes The external material on electrodes that remove impurities form the base metal is called - ANSWERflux The layer formed on top of the weld caused by the flux and impurities of the base metal floating to the top is called - ANSWERslag A small weld to hold base metals together temporarily is called a/an - ANSWERtack weld The molten part of the weld where the heat is being applied is called the - ANSWERpuddle The metal that is deposited by the electrode, welding wire or filler rod during the welding process is called the - ANSWERbead The maximum pull in pounds per square inch that a weld can withstand is referred to as - ANSWERtensile strength An association or society that establishes codes and standards for the welding industry is known as the - ANSWERAmerican Welding Society An arc welding process that uses flux coated rods is called - ANSWERstick welding Another name for stick welding is - ANSWERSMAW SMAW stands for - ANSWERShielded Metal Arc Welding An arc welding process that uses a wire that is fed automatically at a constant speed as an electrode is called - ANSWERWire welding Another name for wire welding is - ANSWERMIG welding