CNC Setup & Operation's Questions and Answers Already Passed

CNC Setup & Operation's Questions and Answers Already Passed When a CNC lathe is equipped with an automatic tool changer it is called a ____. Turning Center CNC mills with an ATC are called ____. Machining Centers The CNC program is created and stored in the ____. Machine Control Unit A(n) ____ assembly device consists of a screw and nut assembly with steel balls in place of threads. Ball Screw Most modern CNC machines employ a high-tech modernized version of ways called ____. Linear Guides A(n) ____ motor is a hybrid electric motor with half motor/ half position sensor. Servo A(n) ____ works by recording the amount of rotation a motor makes (in degrees). Encoder CNC programming does not use north, south, east, or west to identify distance and direction, but instead a similar system called the ____ system. Cartesian Coordinate The place a traveler begins from is called the point of ____. Origin The X- and Y- axes of the Cartesian coordinate system divides the system into four separate regions called ____. Quadrants ____ coordinates require that positions be identified by defining both an angle and a distance (like a vector in mathematics) Polar When using ____ positioning the coordinates of all positions will be reference from the beginning. Absolute The ____ positioning system specifies a distance from the current position to the next position instead of a location related to the origin. Incremantal Programming code that the machine can understand is called ____ address. Word ____- code prepare a machine to engage in a particular