A.3 Test Out PC Pro Certification Practice Exam Latest Updated 2024/2025

A.3 TestOut PC Pro Certification Practice Exam Passing Score: 95% INDIVIDUAL RESPONSESOBJECTIVE ANALYSIS Question 1: Incorrect To answer this question, complete the lab using the information below. You have already answered this question. You are not allowed to view the lab again. You did not complete the lab correctly. Close Lab Report You work at a computer repair store. You are in the process of connecting several devices to a computer, which will then allow you to test each device. In this lab, your task is to: • Connect the USB hub to the computer. • Connect the inkjet printer to a USB port. • Connect the laser printer to a USB port. • Connect the scanner to a USB port. • Connect the external hard drive to a USB port. EXPLANATION Complete this lab as follows: 1. Connect the USB hub to the computer. a. Above the computer, select Back to switch to the back view of the computer. b. Under Shelf, expand Hubs. c. Drag the External USB hub to the Workspace. d. Above the USB hub, select Back to switch to the back view of the USB hub. e. Under Shelf, expand Cables. f. Select USB Cable (A/5-pin mini). g. From the Selected Component pane:  Drag the USB Mini-B Vertical Connector to the USB port on the back of the USB hub.  Drag the USB Type A Connector to an open USB port on the back of the computer. h. Above the USB hub, select Front to switch to the front view of the USB hub. 2. Connect the inkjet printer to the computer. a. Above the inkjet printer, select Back to switch to the back view of the inkjet printer. b. Identify the USB port. c. Under Shelf, select USB Cable (A/B). d. From the Selected Component pane:  Drag the USB Type B Connector to the USB port on the inkjet printer.  Drag the USB Type A Connector to an open USB port on the computer or on the front of the USB hub. 3. Connect the laser printer to a USB port. a. Above the laser printer, select Back. b. Identify the USB port. c. Under Shelf, select USB Cable (A/B). d. From the Selected Component pane:  Drag the USB Type B Connector to the USB port on the laser printer.  Drag the USB Type A Connector to an open USB port on the computer or on the front of the USB hub. 4. Connect the scanner to a USB port. a. Above the scanner, select Back. b. Identify the USB port. c. Under Shelf, select USB Cable (A/B). d. From the Selected Component pane:  Drag the USB Type B Connector to the USB port on the scanner.  Drag the USB Type A Connector to an open USB port on the computer or on the front of the USB hub. 5. Connect the external hard drive to a USB port. a. Under Shelf, expand Hard Drives. b. Drag the External Hard Drive on to the Workspace. c. Above the external hard drive, select Back. d. Identify the USB port. e. Under Shelf, expand Cables. f. Select USB Cable (A/5-pin mini). g. From the Selected Component pane:  Drag the USB Mini-B Vertical Connector to the USB port on the external hard drive.  Drag the USB Type A Connector to an open USB port on the computer or on the front of the USB hub. Question 2: Incorrect To answer this question, complete the lab using the information below. You have already answered this question. You are not allowed to view the lab again. You did not complete the lab correctly. Close Lab Report You are the IT administrator for a corporate network. You just received a phone call from Joshua. You were told that he couldn't connect to the Gigabit network from the Office2 computer, and he asked that you fix the issue as quickly as possible. In this lab, your task is to complete the following: • Open the company's help desk ticketing system named Issue Trax. • Create a new ticket requesting help using the following information: o Summary: Cannot connect to the network o Description: Came in this morning and cannot access any network devices or the internet o Contact Info: Joshua - ext. 234 o Device Info: Office2 Win11 o Priority: High o Assignee: Joshua Anderson o Due Date: Today o Category: Network • From Office2, diagnose and correct the problem. • If necessary, replace any non-working parts with spare parts from the Workspace. • Do not replace working parts with parts from the Shelf. • You will know that you have solved the problem when the workstation can connect to the network and internet. • Add a comment to the ticket indicating that the ticket has been resolved. • Close the ticket.