Dante Level 1 2024 Questions And Answers Solved 100% Correct!!

Does Dante require special network cabling? - Answer-Regular CAT5E or CAT6 Ethernet cable is recommended Dante uses ------- switches - Answer-Standard What are the steps to create a subscription in Dante Controller? - Answer--Open the transmitter and receiver to expose channels of each -Click at the intersection of the two channels you wish to connect -Wait for green check mark to appear Dante works best with ------ switches - Answer-gigabit As sample rate is increased on a device, what other property is usually changed? - Answer-Channel count is reduced If Dante Controller is quit while audio is flowing on a Dante network, what happens? - Answer-Nothing. Dante Controller is not required to be present for a Dante network to work. If a network is only used for Dante and has only one network switch, then: - Answer-The network does not require a managed switch Is there any advantage to using automatic IP addressing on a Dante network? - Answer-Yes. Automatic addressing ensures that devices create a working LAN. Does Dante support MIDI? - Answer-No. Dante only transports audio data, and does not interfere with MIDI. The names of devices and channels in Dante are: - Answer-User-definable and remembered by devices.The sample rate of an audio system dictates: - Answer-The highest audio frequency that the system can handle The bit depth of an audio system dictates: - Answer-The amplitude resolution of each sample What is meant by a "stand alone" Dante network? - Answer-One that is not connected to the internet or to other networks A ----- network topology is the best practice for dante - Answer-Star Dante use fiber instead of copper cable for Ethernet. - Answer-Can How are devices added to a Dante network? - Answer-Devices are automatically discovered and displayed in Dante Controller How are devices restored to a Dante network after power cycle? - Answer-How are devices restored to a Dante network after power cycle? Dante is an example of - Answer-an audio over IP (AoIP) solution On a Dante network, latency is: - Answer-deterministic, set per device The default Dante latency of 1 millisecond is: - Answer-very low and suitable for the majority of applications A gigabit connection can handle ----- channels of Dante audio at 48kHz sample rate and 24-bit depth. - Answer-512x512 A connection between Dante audio channels is called: - Answer-a subscription