ACI Strength Testing Cert.
(C617) These procedure for capping enable concrete cylinders and cores to meet the standard practice's requirements for ___ and ____. - answer-planeness perpendicularity (C617)Equipment needed for the capping process includes capping ____, ___ devices, and ___ pots. - answer-plates alignment melting (C617)Plates for neat cement and high-strength gypsum plaster caps should be made of ___, ___, ___, or ____ - answer-glass metal granite diabase (C617)Sulfur mortar caps plates should be formed against ___ or ____ plates - answer-metal stone (C617)True or false: The purpose of the guide bar or bull's eye level is to ensure that caps remain perpendicular to the axis of the cylinder within 0.5 degrees. - answer-true (C617)To avoid accidents during reheating of cooler sulfur, use melting pots that have ____ - answer-peripheral heating (C617)the technician should use a stiff layer of ___ to cap fresh concrete cylinders - answer-neat cement paste (C617)Hardened concrete cylinders should be capped ___, ___, or ____. - answer-high strength gypsum paste neat cement paste sulfur mortar (C617)True or False: Plaster of paris and mixtures of pair and portland cement are examples of suitable high strength plasters. - answer-False (C617)Sulfur mortars and high-strength gypsum cement cubes must demonstrate a minimum strength of ____ or ____, whichever is greater. - answer-35 MPa [5000 psi] cylinder strength (C617)The cement paste should be applied to the freshly molded cylinder from ___ hours after molding. This is to allow for ___ of the concrete specimen. - answer-2 to 4 settling (C617)The strength of the paste depends on: - answer-the water cement ratio Time Type of cement (C617)A slight twisting action will help eliminate ___ and air ____ when the capping plates onto the mound of the paste. - answer-excess paste voids (C617)Neat cement paste caps should not be used on dry specimens because the caps may ___ and ___ when dry. - answer-shrink crack (C617)The technician should remove all ___ or ___ materials from the ends of hardened concrete cylinders before capping. - answer-oily waxy
Document information
- Uploaded on
- April 28, 2024
- Number of pages
- 8
- Written in
- 2023/2024
- Type
- Exam (elaborations)
- Contains
- Questions & answers