FTCE Florida Art Certification Test
Questions and Answers | Updated 2024
intensity The term used to describe the many degrees of shading between black and white
is
value The amount of light reflected by a hue is known as
Cezanne Everything in nature adheres to the cone, the cylinder, and the curve. That
statement was made by the painter:
synthetic resin paints A newer painting medium is
Expressionism Paintings with the emphasis on inner emotions, sensations, or ideas rather than
actual appearance is called
French Romantic Bright colors, sharp diagonal movements, constantly moving forms and
melodramatic lighting best describes
Soldering Assembling sheets of brass sculptures is safest in a classroom situation when the
teacher uses the method of
achieving proficiency in anatomical construction the least important expectation of a lesson in
modeling the human figure is
compact and unified form The main concept to stress in a lesson on sculpture for beginners is
inadequate wiping If the background of a dry point etching is too dark, the cause is probably
washout In silk screen printing, tusche is used in making a
make-ready Adjusting the impression of a print run can BEST be accomplished by
glazingThe process used to make earthenware waterproof is known as
iron oxide Of the following, the oxide that is used to produce a glaze with red tones is
an armature ceramic sculpture that is not to be fired is often supported with
warp in weaving, a series of threads that lie in a vertical position is called the
Buckram the character of fabrics used in stage costumes is important. Which is a stiff fabric
used to line costumes
jacquard a term applied to pattern in weaving is
pewter Which material was not used in early American crafts
potassium sulphide Copper and brass may be darkened by treatment with a solution of
granulation Ornamentation with small grains of metal, usually gold and soldered to a flat
surface.
Streaming video the term used to visualize a recreation of audio-video
Photo shop common software used for graphic representation and use of scanned material in
mixed media based art is
lithograph The contrariety between grease and water makes possible the
Questions and Answers | Updated 2024
intensity The term used to describe the many degrees of shading between black and white
is
value The amount of light reflected by a hue is known as
Cezanne Everything in nature adheres to the cone, the cylinder, and the curve. That
statement was made by the painter:
synthetic resin paints A newer painting medium is
Expressionism Paintings with the emphasis on inner emotions, sensations, or ideas rather than
actual appearance is called
French Romantic Bright colors, sharp diagonal movements, constantly moving forms and
melodramatic lighting best describes
Soldering Assembling sheets of brass sculptures is safest in a classroom situation when the
teacher uses the method of
achieving proficiency in anatomical construction the least important expectation of a lesson in
modeling the human figure is
compact and unified form The main concept to stress in a lesson on sculpture for beginners is
inadequate wiping If the background of a dry point etching is too dark, the cause is probably
washout In silk screen printing, tusche is used in making a
make-ready Adjusting the impression of a print run can BEST be accomplished by
glazingThe process used to make earthenware waterproof is known as
iron oxide Of the following, the oxide that is used to produce a glaze with red tones is
an armature ceramic sculpture that is not to be fired is often supported with
warp in weaving, a series of threads that lie in a vertical position is called the
Buckram the character of fabrics used in stage costumes is important. Which is a stiff fabric
used to line costumes
jacquard a term applied to pattern in weaving is
pewter Which material was not used in early American crafts
potassium sulphide Copper and brass may be darkened by treatment with a solution of
granulation Ornamentation with small grains of metal, usually gold and soldered to a flat
surface.
Streaming video the term used to visualize a recreation of audio-video
Photo shop common software used for graphic representation and use of scanned material in
mixed media based art is
lithograph The contrariety between grease and water makes possible the
