IICRC WRT Test Questions & Answers(RATED A)

IICRC WRT Test Questions & Answers#1. During the inspection process, restorers shall make a reasonable effort to - ANSWERC. identify and address potential safety hazards #2. A significant amount of water absorption and evaporation load where wet porous materials represent ~5% to ~40% of combined ceiling, walls, and flooring surface areas and where low evaporation materials and assemblies are minimally wet is - ANSWERB. class 2 #3. Multiple extraction of salvageable materials, especially porous material (e.g. Carpet , cushion) often are required to: - ANSWERdecrease drying time #4. To enhance drying, restorers should manage both ambient temperature and - ANSWERsurface temperatures of affected materials #5. Water damage restoration services should not begin until after the: - ANSWERrestorer has entered into an adequately written contract. #6. Two tools that should be used to properly disengage most stretched-in carpet - ANSWERKnee kicker and carpet awl #7. When inspecting a water damage structure, restorers should inspect: - ANSWERall potentially affected areas. #8. Buckled or damaged particle board should - ANSWERremoved and replaced with new material. #9. upon entering a building, professional moisture detection equipment should be used to evaluate and document: - ANSWERapplicable psychrometric conditions and moisture content or level readings . #10. When wet, a structural material that loses most of its structural integrity, but regains its strength when dry, is: - ANSWERConcrete #11 Initially, a method of search for abnormal moisture behind ceramic tile or resilient flooring can be accomplished by - ANSWERusing a non-penetrating (non-invasive) moisture meter #12. To minimize damage and reduce drying time, reduce drying time, restorers should: - ANSWERbegin mitigation as soon as safely possible (RATED A)